Search:

like the body.

I'd get a new diff case. I blew my planetaries once, until a few weeks ago. I noticed the diff was "tweaked", and after taking it apart 5 times in one day, bought a new diff case and new gears. I...

What I did is add enough water so the part is covered, put zip ties on the part, get a metal ketchup or coffee can, and set it out front. I than added the boiling water, mixed the powder (I used 3/4...

I plan on getting one when I get a motorcycle.

If its sharp, could be. I notice TRX pinions turn sharp quickly. <_<

I'm guessing its a 7 cell flat pack. If it is, you need to dremel the rear wall in the chassis. If you remove the esc mount, you will see it.

I would doubble check the mesh. I heard of alot of people using old school slippers and not having problems. I currently run stock screws, no gearcover, slipper tightened all the way down, never...

Believe it was a 22 if you want size. ;)

I have a feeling it will be like on Bad Santa, wish in one hand, dump in another, see what happens first. I personally would like one too, but first is lipo for the Pede.

You can also buy 9V batteries and a 9v adapter at radio shack. If you want an in-depth post, pm me and I'll do a write up.

Their 7 cells are pretty nice, but 6 cels are crap. If he gets 400 plus 26 in shipping, Iwant that buyers info!

I usually cut the price of the car in 1/2, than add 1/4 to 1/2 of the aftermarket parts price. I had a nitro sport with 4 talons, 4 stockers, 4 proline wheels (all mounted) aluminum bits, aluminum...

Ive seen that word unblocked alot recently, and nobody mispelled it or changed out the letters. <_<

Sucks for your situation, you may be able to ask neighbors if they saw anything. Basically for...

First try to tighten the slipper all the way. If that doesn't help, take off the slipper, and on the clutch (if it is the composite pads) you can use a rough peice of sand paper. If that works for a...

This site helped me with my set up. http://led.linear1.org/1led.wiz I use one resister per led on the + side, before they all join. I use this...

I/use/a/high/torque/Futaba/S3305/all/metal/geared/servo.It/runs/about/$40/and/seems/to/take/abuse/well......(spacebar/doesn't/work).

4wdtouringcar,GSXR-1000,4wdstampede

Is the ESC the older version with the wires on the motor going into the plastic on the esc, or does the esc have wires that extend and meets the motor wires? If the truck was glitching, it usually...

I used to ride mongoose. I rode a next, but it sucked. Last time I rode it was when I was 6'6, after my last loop, I parked it.

The esc plates on the waterproof xl5's should have an extra set of holes drilled for the VXL esc.

How old is the motor, and did it get ran without the airfilter?

Im not sure about new models, but I bought a new pro .15, and it had a "boot" on the carb from the factory. :cool:

How is the glowplug? Is it tuned? Is it primed? If your using a glow ignighter, is it fully charged?

Usually when I get a part I repaint it to my liking. You can also contact the manufacture or a local powder coater / annodizer and they might do it. For about $60, you can get a starter set powder...

I think it is not good since most or all people working there doesn't know about them. They do have some good brand car parts, and paints and painting supplies. I am actually glad they did this,...