Search:

Type: Posts; User: stampedevxl11.1

Page 1 of 3 1 2 3

Search: Search took 0.18 seconds.

  1. Well I was wrong. The truck ran okay today. I set...

    Well I was wrong. The truck ran okay today. I set the idle to the correct .7 to 1.0mm. It still creaped so I leaned out the LSN. This was all after I set the HSN. I ran the truck at a moderate pace...
  2. That link really helped thanks! I leaned out the...

    That link really helped thanks! I leaned out the HSN because it had a lack of acceleration sorry. I am about to go run the revo 3.3 again. I feel like I should get it this time.
  3. Well I ran the truck today. I set the HSN and LSN...

    Well I ran the truck today. I set the HSN and LSN at stock settings. The HSN needed to be leaned out a tad. I left the LSN as it was so that I could tune the IDLE because it was at about 170 degrees....
  4. Bookmarked? Sorry but what is that supposed to...

    Bookmarked? Sorry but what is that supposed to mean?
  5. That is what I would think but I read this from...

    That is what I would think but I read this from http://www.cmfhobbies.com/Engine-Problems/I17.htm

    When mixture is to lean, there is potential for blown plugs, over heating the engine due to lack...
  6. .9mm thats precise! Hopefully tomorrow I will...

    .9mm thats precise! Hopefully tomorrow I will have time to tune the truck. I will start by leaning the HSN and slowly richening the LSN.

    If it still runs at idle I will tune the idle screw.
  7. Sweet thanks! My carburetor seems to be tilted so...

    Sweet thanks! My carburetor seems to be tilted so that I cannot actually turn the idle screw. Is there an easy way to reach the screw? I took out the gas tank but that did not help enough.
  8. The truck was used and did not come with a manual...

    The truck was used and did not come with a manual so I am glad you guys are here to help. I couldn't find an online manual, is there one?
  9. When I hold the truck in the air at idle the...

    When I hold the truck in the air at idle the tires spin like they would going 10mph or so, but when its on the ground it barely moves.

    I am checking the temperature with a temp gun on the engine...
  10. I tuned rich but it still gets hot (230+ degrees)

    I have been trying to keep the engine heat down because yesterday smoke was coming from the glow plug area at roughly 240-245 degrees F. (The glow plug is tight)

    I have it rich to lower the temps...
  11. I got it!!! It was simple once I took the mount...

    I got it!!! It was simple once I took the mount off. After I took the mount off they slid in. I then placed the mount on the truck and screwed it in. Thanks!!!
  12. EDIT: ITS FIXED!!! Yeah that is straight...

    EDIT: ITS FIXED!!!


    Yeah that is straight thanks. It just seems that the space for it to fit is to small.
  13. Help please. How to install rear shocks???

    I am sure the answer is use more force but my dad and I gave it all we had.

    I took out the rear shocks to add new oil. To take them out I had to pry them with a screw driver. Now I am trying to...
  14. Replies
    0
    Views
    803

    Super Z

    :) I received my items quickly, wrapped nicely, and they were described accurately.

    This was the thread:
    http://monster.traxxas.com/showthread.php?t=512106

    I would gladly buy from him again....
  15. Bump for a good seller. I received my items...

    Bump for a good seller. I received my items quickly, wrapped nicely, and they were described accurately.
  16. I would like to purchase the: $15 + Shipping...

    I would like to purchase the:

    $15 + Shipping for the rustler and stampede wheels.
    Please reply by a PM And I will use paypal
  17. PM is coming your way now.

    PM is coming your way now.
  18. Is that necessary or does it just look beter?

    Is that necessary or does it just look beter?
  19. Haha yeah the victory wheels are actually for the...

    Haha yeah the victory wheels are actually for the nitro rustler and such.

    What I mean is the tracer rims like these rear ones:...
  20. Can bandit victory wheels/tires be placed on a rustler?

    Can bandit victory wheels/tires be placed on a rustler without any changes? I don't want a bandit but just want to run those wheels on my rustler. Do I need different a arms or anything? Thanks!
  21. Great thanks. I just didn't want to snap the hex....

    Great thanks. I just didn't want to snap the hex. I wasn't sure if it just came off. THANKS!
  22. How can the bearings be removed from the front? I cant get the hex nut off.

    :o

    I am trying to take out the bearings in my rustler vxl and for some reason I can't find a way to reach them. Do I take the hex nut off? If so then how do I do it? Thanks.
  23. Replies
    17
    Views
    598

    If you have the cash get a 3s lipo. It is the...

    If you have the cash get a 3s lipo. It is the best performance upgrade you can get. If you buy a seven cell nimh now and want more power later you will need to buy another new battery.
  24. Alright thanks a lot.

    Alright thanks a lot.
  25. Spektrum receiver and traxxas servo and esc plugs?

    I am wanting to use a spektrum 2.4ghz receiver with my rustler but I realize that the traxxas plugs both have a litttle tab on one side so everyone puts the plugs in the right way for the stock...
Results 1 to 25 of 60
Page 1 of 3 1 2 3