Search:

Type: Posts; User: bob418

Search: Search took 0.37 seconds.

  1. Replies
    7
    Views
    425

    Well installed the mamba max pro and the brakes...

    Well installed the mamba max pro and the brakes ROCK now!!! The 1/16 now acts as it's big brothers!!! Well worth the money!!!
  2. Replies
    7
    Views
    425

    Thanks, I will screw around with the radio

    Thanks, I will screw around with the radio
  3. Replies
    7
    Views
    425

    the car would do a back flip because it goes from...

    the car would do a back flip because it goes from forward to reverse, I did recalibrate the ESC 3 times.

    the brakes work for crap! I heard that people are putting in a new ESC and this solves...
  4. Replies
    7
    Views
    425

    1/16 revo will not brake correctly

    All

    I bought a used 1/16 Revo and everything is working great, except the brakes are not working, so when I am moving forward and hit the brakes, the car does a back flip! I did make sure I am in...
  5. Replies
    7
    Views
    523

    We had a break in the weather and got to run my...

    We had a break in the weather and got to run my e-revo the 20/54 on 4s and I AM IMPRESSED!!! Great car, great set up lots of fun in the local parking lot!!

    Thanks for the input
  6. Replies
    7
    Views
    523

    I will watch it with the temp gun!! Shoot for a...

    I will watch it with the temp gun!! Shoot for a temp of 140 to 160 or so

    Thanks all
  7. Replies
    7
    Views
    523

    4s gearing setup? is 20/54 ok

    I am new to the e-revo and looking at running a 20/54 gear setup on my e-revo brushless with a 4 s setup, and wanted to know if a 20/54 setup up is a good gearing?

    It is the start of winter up...
  8. I used a watts up meter, made a quick set of...

    I used a watts up meter, made a quick set of adapters, but they work great
  9. So here is what I found out max current draw...

    So here is what I found out

    max current draw was about 1.49 amps, that is with the worst case scenario (tires held down and servo stalled)

    I put a capacitor on the feed and the problem went...
  10. No binding, they will not work with nothing...

    No binding, they will not work with nothing connected to them. (both servos, both cars)

    Looks like the Castle bec is NOT designed for bigger servos, and the Savox servos suck amps! That is a...
  11. I am going to try a glitch buster this video...

    I am going to try a glitch buster this video shows my exact issue

    http://www.youtube.com/watch?v=9svdZJU3qz8&feature=player_embedded

    I can't be the castle mamba monsters can't handle the Savox...
  12. It is clear that the s Savox SA-1230 sg servo is...

    It is clear that the s Savox SA-1230 sg servo is causing the issue, I put in a new servo and same issue! I agreed the reason for the flashing led is a brown out.


    It appears the servo is...
  13. RX flashes red when i turn my E-revo hard even when the car is not moving

    All

    I have a e-revo that was upgraded to the castle and mamba waterproof motor and esc along with going to 1 Savox servo instead of the standard 2 servo, lots of torque in that servo!
    ...
  14. Thanks guys!!!

    Thanks guys!!!
  15. E-revo gearing for running a 5s lipo set up

    All

    Just picked up the E-revo brushless and wanted to run it on a 5s lipo set up,, what gearing should I use, I will either run 4 or 5 cell set up for my local track

    Thanks!!

    Bob
Results 1 to 15 of 15