Search:

Well I finally got around to a deeper investigation of the breaks. I found this on the bearing on the inside of the knuckle:
http://img395.imageshack.us/img395/6238/p1010407aq3.jpg

The bearing is...

Mostly sure. That bearing doesn't sit incredibly tight, so I wouldn't be surprised if it moved after the break when I was trying to pull the broken shaft out.



You mean shim the hub, right?...

Just broke my second driveshaft in this exact same fashion. Not a result of any sort of big impact, as far as I could see. The wheel just popped off while the truck was going in a straight line....

If you use the CCBEC, you disable the internal BEC by pulling the red wire out of the Rx plug. The LiPo cutoff will still be controlled by the MM.

Here's what mine looks like on its best behavior... after some fun in the mud:
http://img255.imageshack.us/img255/9248/p5210386al1.jpg
http://img60.imageshack.us/img60/7623/p5210399hd2.jpg...

Here's my conversion in it's various stages:
http://img234.imageshack.us/img234/8393/dscn3519it6no3.jpg
http://img293.imageshack.us/img293/3816/dscn3491xw4oo5.jpg...

I own a brushless Revo that I actually just finished converting, and am still dialing in. I'd say do your conversion. Buying the E-Revo, although it would support Traxxas, would mean you're spending...

I'm writing a technical report on suspension tuning for competitive offroad RC, and I'm in the process of finding sources. I've only been able to find a couple, one of which was from RC Car Action in...