Search:

its all good tho.

wow. Ive split my chassis twice and have yet to break my pro-trac kit arms. **knock on wood***

oh, I know folks who went 3s and needed the expansion kit. You can cut the chassis to fit from what I have read from other postings here. you probably could do a topic search for it. I dont run a...

you need the expansion kit that will lift the esc mount up a bit to fit the 3s.
http://buy.traxxas.com/product_info.php?products_id=5961

You can even do/ use the 2 channel and add the docking base to it if you want/need the save some money.


Rob
Sent from my iPhone using Tapatalk

Yup, it will fit. Its what i use with the sensors for battery volts, motor temp, and rpm( speed).



Rob
Sent from my iPhone using Tapatalk

Proline


Rob
Sent from my iPhone using Tapatalk

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=271195143558&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

Stumbled across this one.

Grabbit Easy out. Its what I use,


Rob
Sent from my iPhone using Tapatalk

Are you plugging in both battery leads for the balance? I mean the main wire and the little set with the smaller plug.


Rob
Sent from my iPhone using Tapatalk

I bought the kit of screws to replace all the phillips headed ones to make them all hex So I used what was in that kit to mount the turnbuckles and such. I think I purchased mine from...

http://traxxas.com/forums/showthread.php?8940107-Everything-you-need-to-Know-About-Protrac-Massive-Thread.

Get two more screws in ther for support. I first did mine with 2 and hit the curb and popped them out.

try to rebind it to the suspect truck and see what happens there by using the link button on the receiver and the set button on the Tx as per the instructions. Just a thought.

Saltwater will effectively "kill" a LiPo battery. Its what my LHS does to make it safe for disposal when a puffed or damaged pack pack is needing to be disposed of.

http://traxxas.com/forums/showthread.php?8940107-Everything-you-need-to-Know-About-Protrac-Massive-Thread.&highlight=protrac

Good reading right there.

Weird
body mount part numbers via pro-line:

#6070-00 , #6087-00 , #6071-00

Sounds like something has gone bad or broken inside the servo itself. Replace or repair.

Thumbwasher kit lists all the body mounts.
http://prolineracing.com/performance-parts/pro-line-body-mount-thumbwasher-kit

The Rx gets its power from the ESC thru the ESC's wiring.

depends on the maker. Traxxas has a set that have the bearings.
3636x for red
3636a for blue

Hey Tim,
When you go to re-install the new receivers clean the back of the receiver and the spot in the receiver box with some denatured alcohol to remove any residue in the Rx box and...

Im not sure about 19/90 on 3s temps wise, Im running 19/90 on 2s and have hit 145 degrees f running high speed passes (40 mph) on my street and thats all pavement no cutting thru yards or anything.

Grab firmly, twist and pull.


Rob
Sent from my iPhone using Tapatalk

A few folks here run SPC branded but my 2s is a venom in which i changed the connector to the traxxas style after removing that multi use adapter setup they have. As for the heat sink for the motor...