Search:

Its the fuel tube on the shock method. You just take apart your shock and put fuel tubing over the shock shaft and then put it back together. the more tubing you have the lower your truck will be....

I have always found that lowering my rustler keeps the COG down which could help in turns.

Recalibrate your ESC to your radio. Mine did the same thing, After recalibration=problem solved.

Do you mean brakes?

The only time I have ever blown my planetary was when I was running my MMM 2200Kv Set up. So I am guessing you are running something like that or your slipper must be really cranked? What motor? What...

Ok that looks sweet. ^_^

You have to take the body off to turn it off/on? If you're talking about the VXL you dont have to do that. I just slip your hand under the side if the body and press the button, Been doing this ever...

Nah, It was easy. All you really have to do is wash the parts really well before you dye them. I didn't have to do this because all of my parts were new. But after I did mine we dyed my brothers car,...

http://www.youtube.com/watch?v=CHZyJi9xR2g

Tell me what you think.

4000mah 3s 11.1V 20C in series.

How much weight should I put on the left side?

Took the 2200kv Powered XO1 out to the Lowes parking lot, and to be honest it did not do so good. I was flying however as I did get it up to about 70mph with only 500 feet to run. But the car feels...

I cant thank you enough man.

Do they make a motor wrap/ sleeve for the 2200kv Motor? And were you powering the pump off of its own power source or the receiver? And finally where can I get that pump and how much does it cost?

I got me an XO roller off Ebay and have a MMM 2200KV motor that I am going to put in it. I heard that the 2200 Motors will get these things to 100MPH but will heat up fast. I was thinking of ways to...

Well I just ran it again and this time with the punch control all the way up, I did not snap any more gears. I have max power up to 65%. I am going to up it to 75% and see what will happen. But so...

I do not want to be chewing gears again. I set max power to 60% and punch control to 100%. If I snap a gear at this setting then IDK what I will do next.

Oh and I just ran my car and I blew another diff. So if you want to run fast. Be sure you have a spare diff for every day U want to run..... :$#!!:

You use the stock gears in ur old tranny case. Make sure you pick up some spare diffs just in case ;)

After seeing Dravens 100MPH Rustler, I started to do almost the exact build he did. I am running a 2200KV MM Motor and ESC in my rustler and let me just say you will be in for a shock. I have still...

4000 mah 11.1v 20c

I also reset my punch control from stock setting to 70% punch control and max power to 75%. maybe that will help some.

I know, I know. With the MM 2200kv Motor on, I shouldn't be surprised I went through two diff internals in 4 days. But how can some people with this set up be running pass after pass after pass and...

Its just tacky putty. Kinda like what you use to stick pics to the wall. I just use Gum because I always have some on me LOL.
And putting it on the inside of the rim actually holds it in at high...

All of them

With your battery, The 86 would be a better choice IMO.