Search:

What servo's would you recommend I am on a tight budget

Okay so by reading on some airplane sites I have figured out I can use a Y harness. Right now my only question would be would it overload the voltage on the Traxxas TQI Reciever?

I have I have not found any on wiring in the third servo to the reciever I just found how different people mounted the servo and set up the linkage.

Links would be appreciated though :D

Hey I have a question about wiring in the third servo for the rear wheel steer. I like the two servos in the front because I do a lot of crawling. Would it be possible to put in a "Y Harness" to add...

Does it come with a reciever?

Mine made a noise like your describing from the motor. I soaked it with Electrical Contact Cleaner ran a couple batts through it and it went away

Lipos sprout from the ground like tomatoes. Parts grow on trees. It rains body pins. Northern Hemisphere=offroad heaven southern hemisphere=onroad heaven. There is free air every 100 square yards to...

stormerhobbies.com for $230(That was 3 years ago though)

Nice pictures. Now you just need to get it climbing up something with and impressive background :D

http://imgur.com/OUdQq

Check to see if the little white strand above the metal part of the reciever is there. If that came off you need a new reciever. Also did you drop and break your antenna on the transmitter like I...

I don't have any video but once I took my slash about 1/2 way up the Eureka sand dune in Death valley. Then I roared down it doing about 70. Fun but my motor temps were hot.

I have a ford raptor body that fits on my e-revo that I have put on my summit just to mess around yes it fits. So does the proline slipstream body. Also I just took the roll cage off of the body and...

Different type of chemistry. NIMH can be discharged all the way while Lipos have to remain above 3v per cell. Lipos are lighter and cheaper and generally give better performance. Lipos also offer a...

Used electrical contact cleaner. Worked for a little while then stopped

Hi I have had a summit for about two years now and it has sat for a few months during school. I started her up this morning and the motor is making a huge amount of noise. It is a loud squealing...

I would be very interested in the chassis, so do a post when it gets past the prototype stage :D

I run e-maxx tires on mine also have the mashers. I love the e-maxx tires

Summit transmission. 17mm hexes Titan 775 3 Micro Servos. All the linkage equipment. Summit diffs. 4 channel transmitter. Summit body posts. Summit body. Canyon tires or tires of personal choice.
...

(2.4 the black transmitter). On the receiver The part of the antenna after the metal section may be damaged. Then you have to buy a new receiver. This happened to my summit and it would go only about...

Get a heatsink for the motor. You may have to modify the gearbox in order to fit it. Also drop the gearing. That should keep the motor nice and cool

Once my friend was driving and a Civic accidentally backed over my slash. I heard a crunch and turned around to see my friend yelling stop. The Slash was just fine

Yeah I have a reciever where the little wire is damaged and I get like 1 foot of range. Try replacing your reciever or go to your lhs and ask them to put in a test one

LOL not mine either thanks for all your help

He says he already put the xo1 motor in it with an strc transmission still think it is over powered and will not last long with that motor

http://imgur.com/uC7df

My friend bought it and won't tell me what it is. He says it will have an x01 motor system in it(Which I personally don't think it will handle and he will blow the...