Search:

im running a 5s 5000 venom in my converted 3.3 and its great so far.

i just finished my conversion. i added summit axles all around, erevo hd diffs and did the single speed mod to the tranny. couldnt be happier. im running it on 5s and its a beast.
...

its a .20 same as a 3.3

i hope your lhs didnt charge you for adj. your servo saver.

i would like to hear exactly what you would like them to do.

the traxxas wheels have a buggy style mounting bead where the proline and axial are like the old maxx size wheel mounting bead. i didnt like the offset(narrow) so i went with a +12mm hub. if you...

http://pictureposter.allbrand.nu/pictures/torqie/revo trenchers.jpg

if im reading your post correctly you can't run trenchers on traxxas wheels. you have to use a 40 series wheel or axial oversize wheels. i have a set of trenchers mounted on proline tech 5 (40...

the first gen pushrods the threads were just cut from the pushrod itself. the ones i bought recently had a steel insert that screws into the pushrod and makes them alot stronger. i broke a couple...

http://www.traxxas.com/PDF-Library/5309_tranny.pdf

5308 didnt come with reverse. basically all parts are the same with the revo chassis. the 5308 had a different radio box, throttle mount, ...

the trencher's look great.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYWE7&P=7

im not a fan of integy parts but maybe these would be ok. they offer them in 6mm and 12mm

in the new world of lipo power receivers i would be sure to get one that can handle the voltage in case you wanna upgrade to a lipo receiver pack.. thats one thing good about the spektrum receivers...

heat any new engine before trying to start it. this is no fault of the engine or the LHS owner.

the temp sensor and receiver battery voltage is nice on the dx3s. so i wouldnt say all the "extras" are junk.

I built this revo with all new parts. its been a 4 month build for me and hate to sell but i have to sell. the truck as well as the engine has been ran 1 quart of byrons 25% gen 2 fuel and thats...

put a slayer tranny in the revo and you can take your gearing much higher. i run a revo with a slayer tranny and run 14/40 with proline VTR's(small diameter)on the track and its great. i tried...

the spektrum receivers are also rated at 9.6 volts so if you ever want to run the high voltage servos with lipo (7.4v) you wont have any problems with the receiver not able to handle the higher...

make sure your pivot ball caps aren't to tight. they will kill rebound if there too tight

they make or made 2 versions of it. .040/.050 thickness. you cant run it with the rollbar. i kinda like it.

the proline VTR's are the best ive used. AKA is also very nice. the proline caliber's are awesome. i run M3 compound at the local track. its hardpacked. the aka soft compound is awesome also. ...

its just to replace the existing one or extra. you should be good to go.

the shock ends wear prematurely no matter what kind of driving you do with it. im not dis'n the revo im just stating facts. as far as the weak point theory goes, its good in certain areas like the...

sounds like a lean lsn compensating a rich hsn.

if you'd like to go with a single servo set up i would go this route. ...