Type: Posts; User: trink3020
Different spur or CB, I've run 52 and 54 and it still throws all 4 off the ground.
First we all lose our usernames, and now the "other model" section for the T-maxx 4909 can't be found. Seriously.....what a mess. I can't even look up part numbers for my 4909 now.
Feels fine, stronger than the pinch in the 3.3 I have that runs great.
No takers? Let me alter the question a little. Except for engine life, what would be symptoms of an engine that didn't go through the proper breakin procedure? If someone just took it out of the...
I went with the OS21tm with the THS146H pipe after much research for my revo. Haven't ran it yet, waiting for warmer weather to break it in. I went with the 21 because it's going to be easy to...
part number - traxxas 3034
I found that 1/4" actually fit better than 7mm. 9/32" was too big and had a lot of slop. Interesting thought on the revo setup as I have a lot of those parts. I guess the transmissions are...
Let's assume for a minute that I'm an expert tuner...:cool:
I got my first truck a couple of years back and was having a problem with the break in procedure. It was the 5308 revo 3.3. It...
Update, the 1501 sucks! They don't seem as powerful as advertised and they don't center for S. Waste of money.
I'm going to flip the shift servo around, I think that will clear up my issue. Need to notch out the chassis first and get it set up but it should work.
Take it back. Mine is a 1600 also and fits nicely. Bring to cover with you this time.
The 1985's don't work, they are a 5mm shim and I need a 7mm. Is anyone familiar with a 7mm teflon shim? What other materials are ok here? Stainless from Home Depot?
Yah, I took it back to factory a couple of times trying to figure it out. The wierd thing about factory settings, setting 1 or 5, is that the steering and throttle servos need to be reversed...
Let me try to clarify. The servo pulls the brake harder when the third channel is set to reverse, instead of forward. This has to do with the travel of the servo.
Wierd situation that I just can't solve running a 2.4 link.
My t-maxx doesn't brake well in forward, but brakes MUCH harder in reverse. I tried reversing the shifter servo and it's the same. Has...
Awesome, that makes sense. Thanks Snook. Going to order up some traxxas 1985 teflons for the job
How so? I just took the motor off and there's no room in between the c-clip and the bell. Looks to be a black ofna mount by the way.
I can't get the two to mesh correctly. Seems they don't want to line up back to front. I've gone through 2 spur gears already, which were probably my fault, but it doesn't help to be 25% less...
Good stuff man, thanks
I would replace that clutch and spring. The bell and bearings are ok. You need to check the slipper on the tranny too. My .02
It's a long shot, but are there traxxas center cvds available yet? I just got a 4907 and need both the front and rear cvds. From this thread it seems as the rear is 6 and 77mm parts. What is the...
Is that cut cardboard taped to the cage? At least go with the bottle box, show a little class man.
I do like that cage and the budweiser theme. I might steal that. So what's the final going...