Search:

Type: Posts; User: Apexracing

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    3
    Views
    218

    I would not run in tall grass 5inches or more....

    I would not run in tall grass 5inches or more. Nor would i do any speed runs with those packs. Make sure to check them for swelling because when lipos get over taxed they tend to puff and then they...
  2. Replies
    3
    Views
    233

    I don’t believe they do. It would be best to...

    I don’t believe they do. It would be best to check their website.
  3. Replies
    14
    Views
    323

    Awesome i’m very glad we could help!

    Awesome i’m very glad we could help!
  4. Replies
    1
    Views
    193

    Yes just use castle link to adjust the motor...

    Yes just use castle link to adjust the motor timing. Also those batteries might not have a high enough c rating to support this brushless system in your truck. Get something thats at least 40c or...
  5. Replies
    7
    Views
    193

    Hitec servos do not require a glitch buster, and...

    Hitec servos do not require a glitch buster, and yes they sell replacement cases. You will however need a new servo horn. I used one of the optional revo ones for not traxxas servos.
  6. Replies
    14
    Views
    323

    Sounds like the lvd might be on, and the nimh are...

    Sounds like the lvd might be on, and the nimh are kicking it in early. That would explain why it goes back to normal by switching it off.
  7. Replies
    7
    Views
    384

    To avoid breaking my chassis i went with flm...

    To avoid breaking my chassis i went with flm bulkhead braces, skid plates and rc raven chassis braces. This setup has proven to be reliable for me.
  8. Replies
    14
    Views
    323

    Check both pinions to make sure the set screws...

    Check both pinions to make sure the set screws are tight. Also make sure the slipper clutch is tight as well. Thirdly nimh batteries are not know for run time or having allot of punch. I would...
  9. Replies
    3
    Views
    218

    Get a 1/8th scale monster sized brushless setup...

    Get a 1/8th scale monster sized brushless setup from tekin novak or traxxas/castle. Get the single motor plate and gear cover from traxxas. Upgrade to the 17mm splined hubs with your choice of...
  10. Replies
    7
    Views
    193

    Hey a fellow central new yorker! To answer your...

    Hey a fellow central new yorker! To answer your question if your snapping the ears off the servo case then yes it might be over tightened. It also might be useful to know what tires you are running....
  11. Ah its been a while since i’ve owned one. But yes...

    Ah its been a while since i’ve owned one. But yes its possible to drill a hole. Just make sure to use a titanium but made for hardened steel.
  12. Replies
    10
    Views
    240

    If the switch on my model works then i usually...

    If the switch on my model works then i usually use it.
  13. Replies
    4
    Views
    179

    The set screws in the pinions look like grub...

    The set screws in the pinions look like grub worms. They have been called grub screws for years and years lol
  14. Replies
    4
    Views
    179

    Check your pinions and make sure the grub screws...

    Check your pinions and make sure the grub screws on both are tight. Also Make sure the slipper clutch is properly adjusted as well.
  15. Just have to make sure the pin hole on the shaft...

    Just have to make sure the pin hole on the shaft lines up with the revo style slipper plate. You could always drill another hole as well.
  16. Replies
    8
    Views
    362

    Check the connections to the receivers, also...

    Check the connections to the receivers, also check the on off buttons they have been known to stick and that could be causing an issue.
  17. Replies
    3
    Views
    232

    Any update on this? Others might find your...

    Any update on this? Others might find your solution helpful.
  18. Replies
    10
    Views
    240

    Every castle product i’ve owned has had a switch...

    Every castle product i’ve owned has had a switch go bad. For my mmm2 its only a matter of time.
  19. Make sure to check for loose screws and hardware...

    Make sure to check for loose screws and hardware after every run. Also make sure you wheel nuts are tight after every run.
  20. Replies
    21
    Views
    459

    The thing with the 3906 is you will detonate that...

    The thing with the 3906 is you will detonate that transmission before you ever blow a diff. The internals fit very sloppily together and are mostly plastic. Which equals destruction under brushless...
  21. I use smc 7200 mah 70c 2s lipos in mine. I also...

    I use smc 7200 mah 70c 2s lipos in mine. I also have the Motor power set at like 70%. I get plenty of run time, even with a 18t pinion and mashers on tech 5 wheels.
  22. Replies
    7
    Views
    446

    Search through the picture thread on here and the...

    Search through the picture thread on here and the brushless group. There is bound to be plenty of photos.
  23. Replies
    13
    Views
    469

    you can even buy pre soldered adaptors as well.

    you can even buy pre soldered adaptors as well.
  24. Replies
    60
    Views
    2,542

    Really high quality build. I’m jealous!!

    Really high quality build. I’m jealous!!
  25. Replies
    2
    Views
    235

    I donít think the lat ring gear fits the hybrid...

    I donít think the lat ring gear fits the hybrid bulks without some dremel work on the diff housing area. The ring gear is a touch bigger.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4