Search:

Most likely 1 or both of the ball bearings that hold the clutch bell in may have detonated and is no longer spinning freely. I would check there first.

------------------
Nitro Maniac...

The restrictor that we are talking about is part that reduces the amount of air going into the carb, which also reduces the performance of the engine. I'm not sure why Traxxas did this. ...

Nitro 4tec doing some high speed passes. Made the mistake of misjudging the distance and smashed into the side of the Sport and flipping it up in the air and it came crashing down on its top. Thats...

If I run my truck everyday then yes I would see that you would not need the After Run oil. I on the other hand run them once a week and just to be safe I first disconnect the blue wire and put 3...

Since you're able to start with a seperate glow ignitor, a good possibility that the EZ start box is probably shot and just needs to be replaced.

------------------
Nitro Maniac...

Pliers work. I used a small blade screwdrive and carefully pry up on the restrictor from the side, then used the plies to pull it out the rest of the way. Hope this helps.



------------------...

I've look at both the Rush and the Sport, and decided to go with the Sport because I have found more hop ups for the Sport because many of the parts that fits the Nitro Rustler also fits the Sport. ...

I know people have talked about pulling the restrictor from the carb for more air and has had success with it. I have done and and notice an increse in speed and acceleration. But also notice that...

What kind of hole would you perfer to cut into your windshield?

You may need to disassemble the 2 speed transmission to see if anything is off or broken.

http://tonysrc.4t.com

------------------
Nitro Maniac
http://tonysrc.4t.com

What happen to all the posts here???

------------------
Nitro Maniac
http://tonysrc.4t.com

Oh what the heck. Here's my website.

http://tonysrc.4t.com

------------------
Nitro Maniac
http://tonysrc.4t.com

RC Neon has many options. The lights on my truck are ones I built from parts I purchased from Radio Shack. My next project is going to be alternating Red and Blue LEDs in the windshield.

Not 1 drop, but more like 5 or 6 on each side. Besides, if gives me an excuse to go by some new wheels. Possibility a set of alloy wheels by HG. What do ya think? And at least I didn't chew my...

How would you recommend on glueing tires on the 4Tec? I use some CA that was recommended by a LHS and it works great on my Nitro Sport and Rustler. When I glues my tires to my 4Tec, I prep every...

RC Rick, I agree with you set up on having the stiffer springs up front and softer springs in rear. This setup gave my Nitro Sport more traction and kept the rear wheels on the ground. The question...

Come check out my website.

http://tonysrc.4t.com

Gears were greased, and nothing was binding.

What do you guys think of starter boxes?

Or the Yank eliminator.

Thumbnails are working. I use Front Page. I forgot, websites don't like spaces.

Fixed the thumbnails. So it should show the full pictures.

Come check out my website

http://tonysrc.4t.com

Here is my address to my homepage. Come check it out.

http://tonysrc.4t.com

Here is my web site for pictures of my RC's

http://tonysrc.4t.com

tekan55: Is the steering on your 4Tec very sensitive?