Search:

Type: Posts; User: londonguy

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    31
    Views
    1,750

    I just installed the GPM steel ones... They...

    I just installed the GPM steel ones...

    They reduce most of the slop and everything feels much tighter... only problem is that the rod ends are a complete joke. They have ended my fun every single...
  2. I have a feeling it is this, i've sent tx, rx and...

    I have a feeling it is this, i've sent tx, rx and servo back. Might have to get a better TX if it breaks again.
  3. Of course yes I always turn on the TX first........

    Of course yes I always turn on the TX first..... I have only detailed those findings because when the TX isn't on the servo will center itself.... so the servo/esc/RX seem OK.

    I have already tried...
  4. Problem with car... servo goes full left lock.

    My car has developed a fault where the steering servo goes full left lock.

    Eg. Transmitter off, plug in battery and press EZ set button. After about 20 seconds the servo will center.

    Soon as I...
  5. Replies
    31
    Views
    1,750

    Is there any slop in them? With the stock ones...

    Is there any slop in them?

    With the stock ones the rear tyres have got 1-2 mm of movement in them.
  6. Replies
    31
    Views
    1,750

    Adjustible toe link?

    Does anyone make decent adjustable toe links?

    I replaced the stock hollow balls with the steel ones which reduced slopped SLIGHTLY, but now I need to eliminate ALL slop and I also want to be able...
  7. Replies
    46
    Views
    7,578

    WHAT? I don't even............... that is just...

    WHAT? I don't even............... that is just amazing.

    How on earth did you make that....
  8. Replies
    24
    Views
    3,140

    I see you got an integy heatsink + fan for your...

    I see you got an integy heatsink + fan for your motor but what bout ESC?

    Did you just buy another fan and stick it on somehow? or does someone make a kit with both fans?

    I need to cool my motor...
  9. How hard is it to paint those bodies? The...

    How hard is it to paint those bodies? The finished article looks great but how hard must that be?

    Also the painted bodies are SOOOO expensive.

    Edited for language. If you see a starred out...
  10. Yeah that's what I'm trying to do :) Just a bit...

    Yeah that's what I'm trying to do :) Just a bit of confusion over exactly what type to get!

    I've ordered a Hudy 1.5 and 2.0mm drivers thanks all.
  11. What tools are required? Manual confusion...

    I'm a bit confused...

    The parts lists shows 2.5mm and 3.0mm screws.

    The manual says the supplied T-Wrench is 2.0mm and the Ball Driver is 2.5mm.

    So something isn't right here.

    Can someone...
  12. Replies
    8
    Views
    1,643

    If you cut the whole window out you will reduce...

    If you cut the whole window out you will reduce the strength of the body shell and it won't be that strong on impact.

    Tbh you don't need to cut THAT much of a hole out.
  13. Replies
    22
    Views
    1,736

    When is the car flipping? For example if I put...

    When is the car flipping?

    For example if I put on some Sorex race tyres (i think they are used in most world championships) then the car will flip if you corner too tight and too fast... simply...
  14. Replies
    3
    Views
    902

    If you thinking of going 3s....

    Don't bother getting more than 1 battery....

    The stock ESC will go into thermal protection mode before you know it. I've yet to use more than 800mAh out of a 1500 battery because it gets too hot...
  15. Replies
    1
    Views
    216

    how to get geometry setup right?

    So I had to replace all my axel carriers and now my geometry is all out. I've done it by eye for now but I'm wondering how you all set your cars up?

    Do you need to buy some sort of car setup stand?
  16. Replies
    6
    Views
    1,487

    Almost any 1/10th touring car wheel will fit.

    Almost any 1/10th touring car wheel will fit.
  17. That's a good point! The battery bay is like it's...

    That's a good point! The battery bay is like it's own hardcase.

    Good point about the foam but a few mm of foam around each side isn't that much and most lipo cells are just bare cells with some...
  18. Random question about lipo batteries + removing wrapping/casing.

    I've got these new batch of lipo's that are thicker than normal due to them having some additional foam wrapping over the cells.

    I've removed the wrapping and now I've got the bare silver cells...
  19. Replies
    92
    Views
    29,649

    Just want to warn everyone that ***** seemed to...

    Just want to warn everyone that ***** seemed to have modified their manufacturing process and are now wrapping the LiPo cells in this plastic white "tape" which has some sort of foam sandwiched...
  20. Replies
    6
    Views
    1,487

    They were some tyres from the LHS. Said Action...

    They were some tyres from the LHS. Said Action Tyres on the box and they are made in Italy.

    50 on front 45 on the rear I believe. Not sure what type of hardness rating that is or if it's just the...
  21. Issues with endpoints / exponential - Ken Block VXL

    I've got a Ken Block VXL and I've got a bunch of issues...

    Out of the box it turned much harder to the left than it does to the right.

    So I followed the instructions for setting the end points...
  22. RPM A-arms for Traxxas Mini E-Revo - FIT RALLY?

    Are the A-ARMS on the mini e-revo the same as the arms on the Rally?
  23. Replies
    6
    Views
    1,487

    Short Gymkhana Review.....

    So I recently got a Gymkhana VXL after deciding to get back into the hobby...

    In short? It's not that great in stock configuration.

    1. Tyres: Great for half throttle low speed spinning and...
  24. Replies
    4
    Views
    386

    Yeah surely with the wheel fitted the nut will...

    Yeah surely with the wheel fitted the nut will pull the link tighter than it is in that video?
  25. It's simple you switch to NIMH mode in which case...

    It's simple you switch to NIMH mode in which case it will start and drive... you juist wont have any LVC so don't run your packs too low... and watch incase your ESC explode.
Results 1 to 25 of 30
Page 1 of 2 1 2