Search:

for my power supply I use http://www.ebay.com/itm/12v-Volt-DC-30-Amp-Power-Supply-3-Diff-model-BlackSteel-/190389573056?pt=LH_DefaultDomain_0&hash=item2c541a55c0#ht_2826wt_902 and I use a hitec quad...

j.f.s thanks alot!
im going to order the 6mm teflon i assume those go on the 5118
8x16 BB bearing thats what i needed to shim last time

hm I thought you just used a certain type shim. I don't have a micrometer but they're stock bearings

can anyone give me the part number for shims. Hopefully on tower

I just installed a new diff in my revo off ebay it seems too tight to shim now but I'm sure after a run or 2 it can use it. My...

I'll give you $20 bucks + S&H! J/k lol... But probably about 200-250?

the other car is further back near the trees going up the opposite hill. Just look above the first car you see

bigdaddy what gearing are you using with 3s lipo? Did you put the speed pinion in? I use 17t pinion with my 3s lipo and it usually gets hot in 15-20 mins if I'm bashing hard. Faster if I do speed...

my cousin and I were bashing saturday and we crashed into eachother head on. Broke my top a-arm and bent his tow bar. I'd say he won lol. I'm thinking it's rpm time? :cool:

I've been wanting to hook my mmm to my dewalt and try it with 6s lipo but I'm afraid the esc won't like it lol

has traxxas said anything official about this issue yet? I want to buy a spartan but not with these issues.. And I can't afford to drop a new system in a new boat right away

I used summit wheels with my mashers gives a nice wide stance it's a bit more work gluing them though

I got a bm6 because bob recommended it and it is perfect. I just velcro it to the receiver box

you could get the mmm with 2200:v motor and water proof it. But you void the warranty and if you like crawling at all the tekin is the way to go. It's harder to waterproof though I've heard.
...

I was GOING to do this but I blew them up before I got around to it lol... I bet it makes them into a great set of tires

imo sounds like a good deal. Make sure you see it run first because esc and motor are the most expensive thing to replace. Other then then make sure the tranny sounds good and you should be set

I'd like to say your irrisposible for leaving the lipos like that but I think when I drive somewhere with my car I don't carry a metal box to seal a busted battery in either abd no way am I taking it...

I may be wrong but imo most people drive the car and the stockers shred on them one day heh. I hit a jump and hit the throttle to level out and I guess I ovedid it hehe 2 rims with foam and some...

great pics. I wish there was terrein like that near me.. The only mountains in florida are landfills lol

my problem was when they use it they hit the shifter and t-lock switches..

they still sell the brushed version? How long till you upgrade hehe

I wish the diff were tougher and the esc didn't overheat heh



I had this happen alot. I found that if you tighten the 2 screws like normal then back them out until the bumper can move slightly...

if he's getting the tekin I'm sure he can set it up to race it's just tires rockers and pushrods really.

if you wanna race really it would be mt and against erevos and savages? I wish there was...

just wondering what you want the summit for over the erbe?

I've been using http://www.thetoyz.com/cart/thetoyz_details.lasso?id=12522&cat_name=MINI%201/16%20REVO for a long time. I got tired of that exact problem your having. I liked this because it comes...

I didn't realize the tekin required any modding to install.. Good to know and nice build thread btw ty