Search:

Hello
I have what I believe is an old Model 4910 It has all black plastic and Phillip head screws.
My question is are the A-arms the same as the new 4910 ? One of mine broke.

Thanks
E3

Ok Thanks for the info guys. This will be the second T-Maxx that I have ever owned my first was the first 3.3 T-Maxx it was so fast and top heavy I had a hard time keeping it on its wheels. So I sold...

Hey your right After some looking around at other pictures it looks to be a 2.5R

My next question is did the 2.5R come in a T-Maxx or is it only an after market Traxxas engine? The only pictures...

Hello
I need some help identifying a T-Maxx that I bought off eBay.
I have not received it yet but the seller sent me this picture.

I want to know if it is a 3.3 chassis or just a 2.5 with an...

I did the wheels on the wing also. Worked out great for me.

http://i7.photobucket.com/albums/y292/EARRNHARDT3/100_0362-Copy.jpg

Thanks guys for the information.

Now I need to make an order to Tower Hobbies

Ok that explains it.
I never measured the old wheels.

So can I convert the new 5309 to run the 14MM hex wheels?
Can I just get a set of pins, hexs, and nuts?
By the looks of the parts...

Well I looked at pictures on-line And it looks like to me that the center hole is a lot bigger on the new splined wheels than the older type of wheels.
See pictures below.

HERE IS THE NEW WHEEL
...

Hello

I ordered a new 5309 Revo the other day.
My question is I have a few sets of 17MM hexed tires/wheels from my Savage and an old Revo that I no long own.
What is needed to to be able to...

I just got my two from Tower Hobbies that I had back ordered. So they must have some somewhere stashed. I am going to put them up on eBay As I don't need them now I found one else where some time...

No,Thats why you use the screen. If you mean dust then a little more but it's worth the cooling effect you gain for a little extra cleaning.

I also cut out my window and added screen and I used ShoeGoo and it will not mess up the body or paint. I didn't cut a rear window out. It looks to me it will push the air out the back and force it...

I got my set from New Era but I can't tell any different with or with out them



http://www.neweramodels.com/item.cgi?session_id=awgflxfcgsesmoucbbcyrtigpseiqtyr&part_id=10160

http://i7.photobucket.com/albums/y292/EARRNHARDT3/Thisthreadispointlesspicture.jpg

I added a fan and cut out the windsheild and added screen to it to keep out the big stuff.

http://i7.photobucket.com/albums/y292/EARRNHARDT3/020-1.jpg
...

owners manual page 16 states
If it is flashing red to green It is in Over Voltage Protection Mode.
Max voltage in Lipo mode is 12.6 V and 18v in NiMH mode.

It don't have any thing about green...

resized to the rules

http://i7.photobucket.com/albums/y292/EARRNHARDT3/013-1.jpg

http://i7.photobucket.com/albums/y292/EARRNHARDT3/014-1.jpg

I added the same fan to my ESC and I have a Duratrax mini quake heat sink coming.
I have my fan blowing on the heat sinks. Looks like you have yours sucking air away from the heat sink. Mine will...

Their web site said they are new and improved locking bead.

http://www.prolineracing.com/p-695-split-six-2230-bead-loc-front-wheels-2-for-slash174.aspx

I don't have any LED's yet. I will have to get some thou.

RPM say you can use modle glue also. you could try that i guess

I was thinking of putting a big peice of plastic that will cover all three holes to sandwich the bar between the body and the plastic.

I recivied my RPM light set today and not overly happy with it.

You have to glue the len's and guards on to the lights.

If you want clear lens and no guard do not use CA glue it will frost the...

I made this light bar protector this morning. Its made out of aluminum tube.
I bend it with my vise so there not as nice as I would like. I threaded the center kicker bar and the than drilled and...

Three of my four wheels would not come off ethier. I used a pair of pliers on the T-handle. They came off with a lot of force.