Search:

Does anyone out there know if the traxxas BB kit will work for a picco .26 MAX?

i run traxxas clutches with my .26 red dot and have only had to buy 1 set & that was because the throttle return spring broke and the engnie free rev'ed

Dynamite 053 LOVE IT
to mount i used a metal coat hanger bent to fit. mounted under chassis with the front bolt of the throttle servo mount

...

installed some new tires


http://i56.photobucket.com/albums/g164/landondale/CIMG1459.jpg
http://i56.photobucket.com/albums/g164/landondale/CIMG1461.jpg...

i run the picco .26 red dot and use the dynamite 053 exhaust system (WOW)

40 series pro-line are 23mm

check out this site http://www.impaktrc.com/index.php?cPath=28_34_217
1/2" offset wheels will make the truck 1" wider overall
i like the lpr bowties w/ 1/2 offset

i have the .26 picco red dot and i love it great running easy to tune but i run a dynamite 053 sidepipe there are rear mount pipe that others say work well with the engine (i prefer side) you will...

just asking i thought i heard someone say no mods nessacery to instal into a revo?

the Platinum comes with a close ratio gearset in the tranny you will want a wide ratio gearset

++++1 the tmaxx should not even be an option

i run a 17/36 ratio clutch and spur with the wide ratio tranny guts and mine loves it


picco .26 max red dot w/dynamite 053 exhaust

http://www.qoncepts.com/

maybe traxxas sway bar kit

it doesn't wheelie as bad as you think. i usually keep it real low to the ground and let the slipper do some work 17/36 gearing w/o center diff

http://i56.photobucket.com/albums/g164/landondale/CIMG1451.jpg
http://i56.photobucket.com/albums/g164/landondale/CIMG1452.jpg
http://i56.photobucket.com/albums/g164/landondale/CIMG1456.jpg...

heres a close look but i have no measurments



http://i56.photobucket.com/albums/g164/landondale/CIMG1270.jpg

i run a dynamite 053 sidepipe on my .26 red dot and love it. tons of power



excuse my dumb reply did not read the question properly

my problem with the ofna mount is that i cant get the spur gear mesh just how i want it with a 17/36 combination

its just a standard 2.5 chassis with the wide ratio tranny gearset (no CD) 17/36 clutchbell/spur gear. i have upgraded to the extended wheelbase rear a-arms and BTW DON'T USE THE OFNA ENGINE MOUNT!!

is it possible to put badlands on lpr wheels? if so which ones?

every bit of 50!! gotta be

i just got done breakin in my .26 red dot and i love it. it seems to be a very easy motor to get along with

well got it broke in and i gotta say it's the smoothest running mill i've delt with (i've only messed with a 2.5 and a 3.3) i love the power. got a 17/36 gear setup with the wide ratio tranny...

are you from NC?

yeah i would say badlands or maybe LPR crimefighters