Search:

Type: Posts; User: TheMajekalBum

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    5
    Views
    426

    I run a Dynamite Fuze 6800kv motor/esc combo,...

    I run a Dynamite Fuze 6800kv motor/esc combo, $120 and comes with a programming card. You dont need a crazy powerfull big block. I also got traxxas cvds(corners and centers) with shimmed diffs. The...
  2. You will break other parts by doing this mod. It...

    You will break other parts by doing this mod. It will be stressing every suspension piece of the corner that lands first. The 1/16 revo only has 2"(80mm) of ground clearance at most with larger...
  3. I've sealed the end caps before after assembly. ...

    I've sealed the end caps before after assembly. I was worried about excess sealant getting into the diff oil and spider gears, messing up the oils weight or locking the diff. Still eventually leaked...
  4. Replies
    7
    Views
    910

    I run dual servos and lights on my newer build....

    I run dual servos and lights on my newer build. I'm running a spektrum radio, steering and aux ports are for the servos and I use the bind port for the lights and capacitor.
  5. Replies
    20
    Views
    1,322

    My Dream Build is Complete!!

    Never kept a running total on it but from the prices I think I remember, the total is a touch under $1500 as it sits in the pictures. Expensive hobby but you gotta pay to play.
  6. Replies
    31
    Views
    1,235

    If I remember right my balance stand is made by...

    If I remember right my balance stand is made by Integy and I use "sticky tac" as weight. I did have to clean the grease out of the bearings on the balancer to get it to work properly. Basically once...
  7. One of my strc plate lets the motor walk a touch...

    One of my strc plate lets the motor walk a touch as well. Heres what I do that works for me. First I do a "test mesh" and slowly spin the spur by hand to find the tightest meshing area. Then I use...
  8. Replies
    31
    Views
    1,235

    Strap and balance your tires too(do some...

    Strap and balance your tires too(do some googling, lots of tutorials out there)! Ballooning tires raises your right height and severely diminishes the tires contact patch. That alone will help it...
  9. Replies
    53
    Views
    2,037

    Just to clarify why I went with the boca ceramic...

    Just to clarify why I went with the boca ceramic yellow seals on my build(was 135 for the set when I got them and included drive line bearings only, no rockers or steering). I was looking for...
  10. Replies
    11
    Views
    475

    https://www.youtube.com/watch?v=kVa5ah0ebl8&list=U...

    https://www.youtube.com/watch?v=kVa5ah0ebl8&list=UU-kXwH01I4eqWf9SPOtnc2A&index=4
  11. Replies
    11
    Views
    475

    https://www.youtube.com/watch?v=7l-7X11X50M&list=U...

    https://www.youtube.com/watch?v=7l-7X11X50M&list=UU-kXwH01I4eqWf9SPOtnc2A

    Should answer your questions of snow running. Powder isn't much fun for long, you really need slightly wet packable snow...
  12. Replies
    5
    Views
    275

    I can't help with adjustable linkages but if you...

    I can't help with adjustable linkages but if you got a spektrum radio it's fairly easy. You set the aux port to mix mode and reverse it's direction. Then you hook up each servo individually and set...
  13. Replies
    20
    Views
    1,322

    The exoteks are no longer available :(. They are...

    The exoteks are no longer available :(. They are the same as the 3racing sakura zero shocks(got this info from exotek directly) just with a different spring perch and the shock mounts.

    I'm still...
  14. Replies
    9
    Views
    464

    My losi mico rally had a servo saver and its...

    My losi mico rally had a servo saver and its 1/24th scale. It's no where near strong enough to be of use to us.


    http://i.ebayimg.com/00/s/NTAwWDkwMA==/z/A24AAOSwbqpTxUKz/$_57.JPG
  15. Replies
    9
    Views
    464

    With proper set up it's very easy to do, provided...

    With proper set up it's very easy to do, provided you have the proper gear. Some use adjustable linkages, I have no experience with that. I use my DX3S aux port/settings to run dual. I've been...
  16. Replies
    20
    Views
    684

    I used to run the hr unit on my big block build....

    I used to run the hr unit on my big block build. Never saved anything for me, I ended up going back to stock. On my dream build I got the version put out by thetoyz and it seems to be spot on. More...
  17. Replies
    20
    Views
    1,322

    Holy cow!!! Way better than any of my other...

    Holy cow!!! Way better than any of my other builds! Higher top speed than my big block build but turns on a dime, very glad I've learned to save it when it starts to flip. Found a piece of hardware...
  18. Replies
    7
    Views
    334

    You can, but I've heard of many escs burning up...

    You can, but I've heard of many escs burning up because of it. Then on the other hand series is all some people run and they don't have problems. I like to err on the side of caution. I also assume...
  19. Replies
    7
    Views
    334

    The gearing is different on brushless. Slash...

    The gearing is different on brushless. Slash brushless gearing is 31/45 and 28/45 for speed. Dont do series with the stock batteries, many people have burnt out their esc doing it. Traxxas is really...
  20. Replies
    2
    Views
    261

    The notes I have tell me you can use up to a 37...

    The notes I have tell me you can use up to a 37 tooth pinion by shaving part of the mount.
  21. Replies
    4
    Views
    146

    How many cycles on those batteries? How long...

    How many cycles on those batteries? How long since your last tear down and clean?
  22. Replies
    8
    Views
    251

    Yep, can't be found anymore. I was literally the...

    Yep, can't be found anymore. I was literally the first person to have them in hand. My only complaint about them was/is the amount of shims needed to get/keep everything in place. If I remember...
  23. Replies
    56
    Views
    2,208

    I'm digging those hex, I was wanting some of them...

    I'm digging those hex, I was wanting some of them for my dream build, but I couldn't find them in stock anywhere at the time.
    Also from looking they appear to be directional(swap your rears side to...
  24. Replies
    20
    Views
    1,322

    It'll be bashed! My "bashing" is quite lite...

    It'll be bashed! My "bashing" is quite lite compared to some people. I'm not a huge fan of jumping the merv (jumping is when you start to break stuff). I'm more of a rally style driver. Fast, tight,...
  25. Replies
    20
    Views
    1,322

    I thought I noticed a little decrease, maybe just...

    I thought I noticed a little decrease, maybe just cuz it leaked out so quickly. Either way the main reason was the big block set up sheared teeth of two center diffs. No way it'd hold up to a neu....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4