Search:

Just tested the sensor capability of it and it does definitely work if I unplug the sensor cable it cogs if it is plugged in it doesn't cog

the sensor port does work as far as i can tell i have a novak 18.5 crawler and it runs smooth and has no cogging

how do you do it

quick question whats flashing the firmware
awesome news on the 6s

i want to fit this
http://prolineracing.com/bodies/true-scale-ford-f-150-raptor-svt-clear-body/

Can i use the MJ extended body mounts on a slash or wont they fit im pretty sure the back will fit but not sure about the front

wait yo have 14mm hexes or do you have 12mm (stock pede hexes)
if you have 12mm you can just get these
http://buy.traxxas.com/product_info.php?cPath=10691_13653_14037&products_id=9271

this guy did it heres the link
http://traxxas.com/forums/showthread.php?8913392-Thomas-P´s-Stampede-4x4-x-4s-Lipo&highlight=thomas

remount your shocks into a lower position it will also make it more stiff (better for on road) the only downside is you wont have downtravel for snow driving

Baldy I can't revert to old firmware since its an et-3s the 1.38 is the only one I have is there a way to download memo firmware and then instal it on a et-3s?
Thanks for the answer

if you want to you can remove your old tires off your wheels and then just buy some proline Mashers for 2.8 traxxas style beads and then glue them yourself heres a vid to unglue them Caution Acetone...

i didnt try the other 2 lipos but they just did the same thing as the first 2
they all are less than 1 year old (maybe 6 months)
tried an old tq (the one with the long antena) and it did the same...

Lvc set to 3.2 auto cutoff default setting
I have the 4 of the same exact lipo and 2 of them have done it
UPDATE
When I'm going at half throttle and I give the car a push and give it more...

baldy im geared 11/54, venom 30c 5000mah 2s lipo, using deans plugs from batt to esc and 3.5mm bullets from esc to motor all on 12 gauge wire except for the esc which is 13 gauge, how do i fix the...

The rpm slash bumper will not work but you could drill holes in the side of the bumper and put the wheels on the bumper

With the et-3s do you have to run a glitch buster

What kind of adjustments can you make after you do the motor test

@ shaky Will set it to 120 when I get back from hunting on Tuesday and I don't have a glitch buster do u think that would help
Baldy I have tried both smart sense and sensored setting and neither...

Would a glitch buster help

stock servo, spektrum receiver, venom 30c 5000mah 2s lipo, novak balistic 18.5 crawler motor sensored
the problem is that if i give it more than 1/2 throttle it shuts off the led is blinking green,...

any thoughts

Would a glitch buster or a bec help

How do you make the shocks face backward

when you put the crawler motor in did you have any problems with going full throttle and it cutting out
i am having problems with the motor and an et-3s where if i give it any more than 1/2...

just installed my et-3s with a novak 18.5 crawler motor and when i give it full throtle it shuts off any thoughts
i can run it at half throttle but thats it
Please Help