Search:

I'm running the cyclones with rock crushers.
I am also running a 2000kV tekin so I cant realy compare it to stock, but the slipper clutch gets a work out now that it never used to get. I do notice...

I am running RPM fromt A-arms with the inside brace on the difflock side of the lower arm filed enough to clear the bulkhead. I bought these knowing I had to make them work (info off of this forum)...

Yeah just remove enough material out of the front one to clear the locker extension on the housing. I did it to mine 12 months ago, and have not broken it even with rock crushers and a brushless high...

I think I got about gps 24-25mph with the 18V dewalt geared 18/54 with stock tyres on 4s. Maybe you have found the torque limmit of the 14.4 as the kV difference between the two motors should have...

I would replace both since you will have to either take it easy or break the new brush in any way. Then you will have a broken in spare if something like this ever happens again. - My take on it and...

LOL I can tell you she is a beuty!

http://i151.photobucket.com/albums/s129/diby_2000/IMG_1275.jpg

http://i151.photobucket.com/albums/s129/diby_2000/IMG_1276.jpg

It is a baby formula tin....

All this talk about the fastest colour and what not but nobody has mensioned that the blue ones are the toughest and crawl the best!
Now I've repowered mine its also too fast!

+1 I realy like the look of that. Look forward to seeing it come together.

This will be my next body just to see how it goes.

http://pics.towerhobbies.com/imagel/p/lproc3314.jpg

I'm intersted to see how much different it is with less weight on top but cant see it...

Lowering the body was very easy to do. Excuse my very badly beaten body it has had a tough life but keeps on keeping on and coming back for more.

Sep 1.
I filed a bevel on the lower parts of the...

My summit did this exactly in the early days of ownership. I found nothing amiss and just replaced the a-arm. There is still evidence of rubbing on the half shaft but it has not broken again after at...

The very first batch of summits had this problem due to manufaturing fault or something like that. If your brand new summit is 27MHz not 2.4GHz then I suggest that you have purchased one of the first...

Yeah I definately like the thicker shock oil. If anything I would like to try it a bit thicker still, but I hear it can blow the shock caps off if it is too thick.
I can still bottom out (diff out?)...

Thanks Jaminn I cant speek for everone but me and my family missed out on the worst of it. BillyGoatRacing lives a just down the road so they are also ok.

I'll try the vid again.

...

Ok time for a quick update.

I have not had much time to drive as the entire family has been crook.
Just did a quick speed test with 4wd yesterday and got 67.1kmh but I'm not sure if it was topped...

2 of the better looking scale summits I have seen in here.

Yeah I think it is a trough hole just for the extra thead. Traxxas must have originaly thought that screw should be 8mm like on the revo and the non t-lock side but had to sacrifice some thread to...

Just try it. I dont think it will make all that much difference. If it were me I would be trying to extend the wheelbase further rather than shortening it. Longer wheelbase means you can climb or...

I have 2000KV but It is too soon to know if I should have gone lower yet. I am also running 8.26" high tyres which make it seem fast. Time will tell. When I finally get my new drive shafts I will be...

Maybe I was not clear in my previous post



I beleive that the thtough hole you are talking about in the fromt bulkhead is just a result of the material that had to be removed from the original...

I noticed this screw was shorter and my quick investigation told me that it had to be shorter than on the revo as the t-lock diff protuded more on that side of the bulkhead and this is how it had to...

I drilled the hole and dremiled the slot. 10 mins work worth every second.

The new 2.4GHz 5 chanel receivers are a bit of marketing hype from what I have read. Sory VonGearStripper you will have all 5 channels used on your receiver. Ch1 (two of them) steering servos, ch2...

From what I have read herer today, I think what you will find the "new" 5607 summit comes with a 2.4GHz low output (at least compared to the high output), single model memory, 4 channel version of...

Ok easy.
1. First things first, turn the transmitter on, then the truck.
2. Flip the truck onto its roof.
3. Grab one of the front wheels and hold it then try and spin the other front wheel. If...