pm sent to you
Type: Posts; User: dcole592
pm sent to you
It may be in training mode.
Will the warranty apply to the 2338x's since lundsford made them.Then traxxas bagged them?
When I got mine the 3500kv was out. I took a chance on the 3200kv.I figured only 300kv difference. No big deal right.I like what i got performs well.
Yeah they are out all the time.
Free gift to show their appreciation for all the parts he buys. lol
Oaks here's the link
I can't take credit for that knowledge. Loot has a nice write up on all this.
Yeah your right reaper. But if you use them with the small ends they work pretty good. Plus I got those because the lhs only had one 3941.
If you use those for toe links you need to buy two they...
oaks Ill try and find the part number. They are a traxxas part.
I'm using the vxl rear camber links and for toe I'm using traxxas 94mm titanium rods with small ends.
I can't remember the part number.Loot do you remember what it is I gave it to you.
+1 Dig on the cc sv2 with the tacon motors. I run the sv2 with the tacon 3650 3200kv in my rusty.
I'm running talons for now. The motor temps average around 115.
The esc temps average around 120's.
I would also put some 3mm lock nuts on the screws that go to the caster blocks.Thats if you have aluminum casters cause they tend to back out if you don't use the lock nuts.
The pede benefits cause of the high center of gravity.
No,actually on a 2wd slash the front arms are the same as the ones on a rusty. So when you put the slash rear arms on a rusty it actually narrows the rear end.This is how you can run front offsets...
My lil' rusty
Some shots of the pede.
Kinda reminds me of George of the jungle. lol
I was looking for mine but I couldn't find it.
If you have the instruction sheet for them the part numbers are on there.
jh heres a thread on how to post pics
At bazooka boots rc stuff sounds like a fair trade to me
I'm running a cc sv2 esc with a tacon 3650 3200kv motor in my rusty. I see no problem running it a pede. The esc ran me around 85 bucks that including the price of the field program card. The motor...
The field card is real easy to use. All you have to do is unplug the esc from the rx and plug it into the card and hook up a battery to the esc and thats thats about it. lol
If you run rear slash arms I would suggest running front rims all the way around.Thats the set up I run on my rusty.The other reason to run front offset all the way around,Is that if you run rear...