Search:

+1 for velcro. Easy to install and makes pulling the lid off a snap.

4 - 2S 20C 2200 MAH *****'s in parallel; with 2 3C *******'s on the way.

+1. Welcome to the MERV world.

Use velcro instead of clips; put a strip on the battery boxes and one on each side of the body. No more body clips and easy lid removal.




More airflow is needed. Cut the windshield out and...

Switching two of the three wires leading from the motor to the esc will change the rotation of the motor.

CORRECTION:

Green light means Low Voltage is on and red light means NIMH mode.

Should read:

1) Turn on your transmitter
2) Plug a battery into the esc
3) Push and release "on"...

I had to do that with my Sidewinder Micro; works like a charm.

That looks amazing good job.

1) Turn on your transmitter
2) Plug a battery into the esc
3) Push and release "on" button to turn on esc. (You will see a green light)
4) Push and hold the "on" button on the esc; the same...

Have you changed the springs? I changed to tan in the front (#7147) and black n the back (#7148) and changed to 50 wt oil.

Those look cool. Want to see how they handle the mini e-revo bashing.

Not neccassarily. Saw it last night where the body came off and the battery door was still velcro'd to the body; hence the lipo was flying about until it stopped. Driver error though.

I use the MRC Super Brain and like it; have had it over a year and haven't had any issues..

MRC Super Brain on Towerhobbies. Would need an external balance to charge LiPos but a great charger.

Agreed. Went to the local bmx track and ran 1/16 E-revos against 1/10 Slashes; the E-revo was a blast. Better tires are in order for dirt (almost like driving on ice). Regardless, this truck put a...

Same as some of the others, the velcro on the battery doors is a great alternative. Although, as seen last night, after a hard crash the doors pop off still velcro'd to the body... Humorous it was.

Looks amazing. Great job.

I am having issues with it running lean at around half of a tank. I have kept the tank above half for a couple of runs and the temp stayed around 220 but, as soon as the gas level dropped below a...

I have the THS pipe and love it; have had no issues.

2.5 with THS header & pipe.

http://www.infinityfurniture.ca/Revo_T-Maxx/Hop_ups/T-Maxx_August_2005.jpg

Comes with everything that is in the factory box.

This truck has been looked after and is in great shape. Engine has...

I made my hump pack the hard way as my LHS does not carry the Traxxas hump pack and I did not know that their pack came with the correct end; that would have made my life easier.

That is the...

That is the harness that I used for my hump pack conversion so the charger from the revo can be used.

You will also require this harness for the battery Futaba 6" Dual Servo Extension J (Cut the...

I agree. The head gasket is either worn or there is not a head gasket installed. Take the head off and replace/install the head gasket.

Take the weight off of your tires so there are no flat spots and read this article:

Maintaining & Storing Your Traxxas Nitro Model

I received an email that you had replied last night yet nothing was posted. That is odd.

As for the gunk that accumulates inside the shaft cover, I tie-strapped the bottoms of the covers to the...