Search:

acetone is THE best way to do it. get a decent sized sealed container, put something on the bottom to raise the wheels up, and put 2 or 3 inches of acetone at the bottom of the container. seal it...

Acetone :)

suspend the wheels over 1-2" of PURE acetone in a sealed container and leave them be for a day or two. the fumes disolve ca glue and the tires will come right off. doesnt damage the...

one larger, more powerful motor is far more efficient than two smaller motors. on two 7-cell batteries, the brushless emaxx does about 35mph. fairly safe. however, 6s lipo is in another league...
...

not all lipos will fit guys. i have a hard case trinity 2s 5200mah 35c racing pack that doesn't fit. i can't seem to the clear both the transmission and the outside wall of the battery tray. also,...

I'm kinda tired of being so restricted with the stock battery trays in the 3906 chassis, so I'm curious what other people have done to open up their options.

I've been tossing around the idea of...

i have that charger and it works very well. it's the same exact thing inside as the ******* accucell-6 everyone raves about along with a billion other chargers, but with a built-in power supply and...

i'd say 150 as well. i bought the updated 3906 (widemaxx, updated esc) with worthless batteries, revo response tires/wheels, in perfect condition for $150.

mine does the same thing. ur good :)

http://img412.imageshack.us/img412/4769/est1672.jpg
+
http://img412.imageshack.us/img412/6931/ducttaperolls.jpg

is this going into a 3906 or 3905? those batteries must be pretty new for hobbypartz and they don't have dimensions so i'm curious if they'll fit in my tight 3906 battery trays.

also, for the...

don't use the reverse rotating motor. the brushes are facing the other direction. look in one of the current motors and you can see the small piece of metal (spring) is going with the rotation of...

you won't need to upgrade the drivetrain going to lipos. it can handle 7-cell packs just fine.

the only thing you need is a low voltage cutoff since the evx doesn't have one. the novak smart...

you should be turning off the truck first and then the transmitter. the transmitter should be the first turned on and the last turned off. i dont know why it wants to go into reverse when there's...

yea you'll be fine with one motor and two batteries. what kills motors is heat and too much voltage. the motors on an evx are wired in parallel so they both get the same amount of voltage (14.4...

well....the motors receive 14.4v each, so running just one of them would simply cut the theoretical current draw in half, which would be less strain on the EVX. however, running it on just one...

the 3906 came with a terribly weak steering servo so that's normal. the front end play may be from the pillow bar socket screws not being tight enough (the big allen set screws behind the wheels). ...

i've heard good things about those springs. they're fairly popular in the losi lst world when i had one.

you're wrong on a few things. it IS the same charger underneath as several others out there and it would work great for nimhs and lipos down the road.

however, it is a good charger. since you...

when you do get it hooked up, let me know how it does :D i just got a bone stock 3906 and 80 oz/in is just pathetic lol.

Hey guys..........i just picked up a used (but in really good condition) 3906 e-maxx and did some research on how well it handles brushless power. doesn't seem to do that well with a moderate system...

exactly. and a lot cheaper. once you wear out the tires or want different ones, just get some acetone, find a way to hold the wheels over about an inch of pure acetone in a sealed container, let it...

oh yea, the beadlocks are fake.

ima use the body as a basher, then get a clear proline or another stock body, paint it white and leave the stickers off :D that'll look so sick with the black rims.

so long as you have a charger that works with them and can mount them in the truck, they should work pretty well :)

i'm liking the black 'beadlocks' :D i may go with this shell :)

you can get a similar effect by filling them with various viscosities (thickness) of oil. the thicker the oil, the more resistance it has on the gears inside the diff and slows them down, thus...