Search:

Stainless that sound like a pretty good idea, as the revo speeds up the fan would be applying some load to it. Not sure how big the fan would have to be to get the load somewhat right.

I have used coolpower 15% and though it was rubbish, it ran hot or didn't make much power. Then i tried AP or AT racing 16% and this was heaps better, more power and lower temps then the coolpower...

The Crime Fighters arrived a few days ago and the USPS documents stated that the package only weighed 2lb4oz. I emailed Tower again (3rd time) with this info and the postage fees that were also on...

xdamxincx,
Is there a chance that there is something that you could be clipping the back wheel with while racing. Like a corner marker or wall on the track. My pillow balls seem to get 'pulled' abit...

http://img14.imageshack.us/img14/655/16565290ul.jpg
http://img225.imageshack.us/img225/1861/16565254mn.jpg
http://img14.imageshack.us/img14/6481/16565275fw.jpg...

Aussiesportmaxx, they are defineatly coming USPS air mail. It put them back into my cart and did the shipping calculator and UPS was just under $100US. I think that there is something wrong in there...

That price is just just USPS airmail. I have had heaps sent that way before and never has it been so expensive. Bowties and wabash only came to about $30 so i really don't know what is going on.I...

I have finally been billed for my 40 series Crime Fighters and the postage was more than double the cost of having bowties sent out. This is the reply that I got from Tower when I enquired about the...

The paddles look like they would make good slicks if you cut off the paddle part... :confused:

That new CP body looks pretty tough.

You already know that they have changed your gearing so why not go back to the stock revo gearing. Big Joes are alot taller than stock revo tyres so gearing down won't affect your top speed.

i just got some proline commandos and the only problem that i see with them is that the thread on the srcews is very fine and when they are unscrewed some of the plastic from the rim gets caught in...

GTR, for the red push rods you could cover them with a piece of heat shrink tubing to get them a different colour, it wouldn't be shiny though.

When i dyed my lastest set of wheel I used a large aluminum pot and the Black RIT dye seemed to stain the pot. The colour scratches alot easier than anodized surfaces and the dye was sitting in the...

when i had the ez start on my TM i found that it was hard to start aswell. i found that disconnecting the blue plug wire and using a glow igniter made things alittle better.

bit of snoop dogg would go well with a bling' d out road running revo:D

have to have spinners, be slammed and probably have an Escalade or H2 body.:cool:

I normally race as if my revo is the only one out there but my tunnel vision is not that narrow that i can't avoid a pile up or slower car in front of my revo. The problem is when its coming down the...

Sundevil,
I was thinking about getting a machinist mate of mine to make a larger spur for me but i think that HPI one could work. I think the cb could be more of a problem as the extra lenght (2mm)...

I just started racing at that track with Juzzie a few weeks ago but have been going down for practice and to watch the races for a few months and Juzzie has won every time i have been there. I'm sure...

I think you can buy cans of oxygen from upmarket drugstores, but they are pretty expensive. I remember reading that some celeb's were using them to help them stay 'healthly'.

Yep thats it. If you look at the Rear Assembly with links to Buytraxxas it shows them and has that part no. plus rod ends only in brackets.

Revo 1990,
i think that is a pretty cool design. i personally like the wing to mount so that the lip on my crowd pleaser seems to flow to the front lip of the wing, meaning if it mounts higher than...

Traxxas makes servo horns for this aftermarket servos.

Tower

I checked pro-lines website and there is only about 6grams difference between the maxx and 40series sized tryes so it really shouldn't influence your decision.

Sure sounds good, but i feel sorry for your daughter - you built a truck for her, gave her a go then reclaimed it for yourself:( . hope she didn't cry. lol

Hope you get the other revo running...

I have the 359 for steering and the 360 for throttle.Haven't put them in yet so i can't say how good they are. The 360 is similar to the 357 but it has metal gears and a heat sink body like the 359....