Search:

Also, you may want to use a bit of threadlock on that screw. I know alot of people use the liquid threadlock, but I prefer the teflon(I think that's the material) rolls of threadlock. wrap your...

I can't remember Martin or Marlin ever having a season like this. It's pretty rare for Winstop cup to be this far into the season, and the top 2 are 6pts apart, and the top 5 are all within 100. It...

The mounting of that motor is what would pose the problem. I think you can remove that watercooled head, and place a finned aircooled head in it's place. I suppose it depends on what vehicle exacty...

Is the fuel line going to your exhaust leaking? Or is it possibly plugged? If it is, that would prevent the oh so important pressure that shoves the fuel up the other line into your carb.

I don't know about a bigger fuel tank, but I've seen quite a few posts on here concerning placing a second tank on the chassis. Make a post about that, and I'm sure you'll get some responses. What...

Well, last night I tore the TRX.15's cooling head off, and inspected it for signs of wear; I found none. The piston head was a little discolored, but everything was smooth as a baby's behind. The...

Ohhhhh....I see. Thanks man, that's been bugging me for quite a while. I thought maybe it was just a random thing.

From what I've heard, you have to have 2,500+ posts to write whatever you want it that spot; I understand that. Whats the deal with the other things written underneath? (R/C poster, R/C qualifier,...

Thanks Les

How often does everyone pull maintenence on the transmission? IE: pulling it apart, cleaning and lubing, etc. etc. Are there any certain areas to pay special attention to?
Thanks in advance.

Just by chance, could the glow plug be a problemchild also? I've never changed mine, and I don't even know if its the right one for the motor. I've read that they make different glow plugs for...

Need more data than that to go by, dude!

BareBones, you also have a PM!
:cool:

Yeah, I was looking at it a few minutes ago, and It initially says it's for original owners, but the form you send in with the motor mentions nothing about it. No questions about where it was...

I think the .15 on my truck is on its last legs. Does that Replacement policy apply to owners who got thier vehicles second hand? If it does, how much does it cost, and can I pay extra for the...

Boy, that is sweet. Are you gonna make any more and sell them?

Man, if the motor is getting ready to 'junk out' , are there any telltale signs? Other than it running like ? Could the clutch have anything to do with that performance? How far down do you have to...

Do they sell the J-tube by itself, or do you have to buy the entire stock exhaust to get it?

I bought the AE pipe, but the rubber tube from the header to the pipe is shot. Would my best bet be to put a 180 degree header on it then? Or try and find another rubber tube with a 90 degree bend...

By the way, I tried to make a makeshift rubber tube to replace that one from a chunk of hot water heater hose and some zip ties. Bad idea, Worked about as well as a bucket with no bottom.

I went to hobby town today and bought a RC10GT pipe for the NS. After I installed it, I ran it for about a tank full; and at least it didn't die during that time. The motor doesn't seem to want to...

Thanks guys. I appreciate the responses; I just wanted to be sure that I wasn't going to do something that would screw something up.

Can After-run oil be used as a oil for the air filter? The after-run oil I use is Hobbico AfterRun Oil.

Hey dude, I've been into Nitro for only a few months now, and I'll throw ya' my 2 bits on some of things I've learned so far:

1. Patience is important. Nitro beasts are temperamental creatures,...

They'll glitch from metal to metal rubbing? what metal to metal? there is a ton of different spots on an R/C where metal contacts metal. What specifically are trouble spots to look for and avoid?