Search:

That i understand..... but if I buy a 75mhz receiver other then airtronics and the same channel crystal will they talk to each other?

I have a MX-3 on channel 69. What do I need to get my tmaxx to work with that radio? Someone told me everything had to match so I am not too sure what they were referring too. Was it the...

webshots

checkout my self made wheelie bar..... not as good looking as Swami's but serves the purpose.

http://community.webshots.com/album/93015044MmsiEe

the kit comes with everything you need.... i did remove the reverse cause the engine would jerk it pretty hard.... i run a 16 clutch bell because i like the low end power..... no metal gears just...

had mine for almost a year now..... still with the first glow plug!!!
heres a pic of the conversion


http://community.webshots.com/user/earthmover101

http://community.webshots.com/user/earthmover101

I have a novak brushless and I just blew my idler.... the traxxas book said not to use an aluminum idler 1996x with the steel top gear 3195. Do you need to change out the 3195 to a 3195x too?

you have to gear down if you read my earlier post on the different gearing you will notice that the slightest pinion change makes a huge difference in speed and torque. and this rusty kills my...

If your using the stock servo change it out. Mine was twichy and could not hold a straight line either. (maybe your problem)

I use a hitec hs-5945mg great holding power and huge torque...

SO TRUE...... wheelies are great to show off with and please the kids..... not practical for everyday......... but theres nothing better then going out to an r/c track and having the capabilities of...

I am using dirt hawg tires..... used a stop watch and 60ft avg the times and wow 45mph for about the first 2-5 mins. (these were full speed passes not from a stand still)

forgot to add...... put in some trinity blue springs in the rear and lean you low until the engine quits after 2sec of squezzing the fuel line.... you can keep the high richer since it does not...

my max is geared at 16x72 with the xtm engine wheelies no problem ...geared at 18x72 not happening unless in grass.

I get 10-15 mins on cheap radio shack 2000 (almost a year on those batts) using a superbrain . geared at 15x87 speed 45mph wheelies at every start. geared at 18x87 no wheelies but speed 48-50 ......

My problem was that the antenna seperated from the receiver...I just soldered another 30g wire to the receiver (little longer too)works great. I will never run without a failsafe again.

Nothing...

XTM has a failsafe selling for $20 at hobbypeople.net

I searched the forum and some of what I was looking for was vague so heres my question.....

I run the stock esc with a 16t double in my rustler. Still going to this day. The esc runs long...

The Statment below came from Misbehavin website

"The MRC Super Brain has built a reputation as a good inexpensive charger. However some of the earlier ones that shipped seem to start false peaking...

Thanks for the clarification. I did not know the carriers needed to be upgraded as well. Since its my sons truck age 7 I think I will stick to stock size until it breaks...

So stock bearings...

Thanks for all the responses! Fot those that own the Black Widow Pro.... What are average charge times? Does it have a cooling fan? How about the same ??'s for the super brain
Most of my batts...

Does anyone in the forum use these chargers? I dont want to make a bad investment........

What size bearings do you use for the wheels?
Is it 5x8x2.5 or 5x11x4?

The bushings are 5x8x2.5 but I read to put in 5x11x4. Please clear the confusion.

I am currently using a Hobbico 900 charger that I modified with a 60minute timer (great charger 10yrs old) but I am sure I'm missing the peaks. I am looking at the Black Widow Pro and the ...

i bought the trinity 16t double also....... running 15 / 84 gear ratio... running fast and long with stock x1-esc..... anyone know what turn the x1 can handle???