Search:

Type: Posts; User: crusey

Page 1 of 20 1 2 3 4

Search: Search took 0.40 seconds.

  1. Replies
    4
    Views
    163

    No Its not capable of supporting a heavy SC...

    No

    Its not capable of supporting a heavy SC truck, regardless of the motor you choose

    Use the SV2 in the MERV

    Cheers
  2. Thread: Combo question

    by crusey
    Replies
    5
    Views
    277

    If sticking with 2s the 3800 or 4400 will both do...

    If sticking with 2s the 3800 or 4400 will both do the trick

    Cheers
  3. Thread: Combo question

    by crusey
    Replies
    5
    Views
    277

    Great bang for buck combo Gearing depends on...

    Great bang for buck combo

    Gearing depends on what version of the motor you are planning to get, what voltage you plan to run, and what speed you want

    Cheers
  4. Replies
    5
    Views
    364

    2400 will happily run 4s if you gear the car...

    2400 will happily run 4s if you gear the car correctly (50 mph for bashing, 60 mph for speed runs)

    Cheers
  5. Thread: Cc2400 help

    by crusey
    Replies
    9
    Views
    205

    Use the following settings in your ESC Start...

    Use the following settings in your ESC

    Start Power - High
    Punch Control - Disabled
    Timing - Zero

    Centre your thottle trim
    Set your throttle / brake travel (EPA's) at 100%
    Calibrate the ESC...
  6. Thread: Cc2400 help

    by crusey
    Replies
    9
    Views
    205

    What battery are you using ? What are your ESC...

    What battery are you using ?

    What are your ESC settings ?

    What is your gearing ?

    Cheers
  7. Replies
    11
    Views
    663

    SCT Race Pro combo (1410 3800kv motor) will not...

    SCT Race Pro combo (1410 3800kv motor) will not do 60 mph

    The 1415 2400kv will do 60 mph on 4s

    The Mamba Monster (2650 or 2200kv motors) will both do it comfortably

    Cheers
  8. Thread: Gearing Algebra

    by crusey
    Replies
    7
    Views
    305

    Gear ratio is simply Spur divided by Pinion,...

    Gear ratio is simply Spur divided by Pinion, smaller the number faster the car

    12/54 = 4.5
    Stock 13/54 = 4.15
    14/54 = 3.85

    Generally speaking ........

    Smaller pinion / larger spur =...
  9. Replies
    21
    Views
    703

    Basic Ohms Law (V=IR) Those that do not...

    Basic Ohms Law (V=IR)

    Those that do not understand it, should be running similar specced packs in parallel


    Cheers
  10. Replies
    21
    Views
    703

    Lots of incorrect info in this thread suggest...

    Lots of incorrect info in this thread suggest most of you do a lot more reading before handing out advice

    Cheers
  11. Lipos shoul never be stored fully charged ...

    Lipos shoul never be stored fully charged

    Their internal resistance will slowly rise over time

    When not in use they should be at 50% (3.85v / cell)

    Cheers
  12. Thread: Bec?

    by crusey
    Replies
    8
    Views
    279

    If you are talking about the servo lead they are...

    If you are talking about the servo lead they are ....

    Black - negative (ground)
    Red - positive
    White - signal

    Bypass the internal bec (remove red wire) and throw on a receiver battery if you...
  13. Thread: Bec?

    by crusey
    Replies
    8
    Views
    279

    If the receiver powers up then the MMP internal...

    If the receiver powers up then the MMP internal bec is fine

    Sounds like your servo is stuffed

    Cheers
  14. Replies
    46
    Views
    1,791

    Will feel a bit sluggish at 30 mph on 3s, but...

    Will feel a bit sluggish at 30 mph on 3s, but should work fine

    Cheers
  15. Thread: 14/54?

    by crusey
    Replies
    9
    Views
    343

    Pretty easy to work out a speed change when...

    Pretty easy to work out a speed change when changing a pinion

    Assuming stock is a 13 and you are moving to a 14

    14 divided by 13 = 1.07
    7 % speed increase

    And if we use a 15 .............
    ...
  16. Replies
    14
    Views
    1,690

    LOL @ paying more than $100 for a 70c (not...

    LOL @ paying more than $100 for a 70c (not likely) 2s lipo pack

    Plenty of options around for a lot less money around

    Cheers
  17. Thread: mamba question

    by crusey
    Replies
    6
    Views
    248

    Punch control does nothing to save your...

    Punch control does nothing to save your drivetrain, it simply delays the application of the throttle signal

    Sounds like you need to learn throttle control

    If you want less torque to protect...
  18. Replies
    1
    Views
    205

    1 - Default 2 - 50% 3 - 100% 4 - Disabled 6 -...

    1 - Default
    2 - 50%
    3 - 100%
    4 - Disabled
    6 - Default
    7 - Auto lipo (3.5v / cell LVC)
    8 - Zero (0)
    9 - Smartsense
  19. Thread: mamba question

    by crusey
    Replies
    6
    Views
    248

    Start with ............ Auto-lipo LVC 3.5v /...

    Start with ............

    Auto-lipo
    LVC 3.5v / cell
    Punch and Torque Limit disabled
    Zero (0) Timing
    50% brakes


    Cheers
  20. Replies
    4
    Views
    283

    Why run 2s packs in series, just buy a decent...

    Why run 2s packs in series, just buy a decent 5000 mah 40c 4s pack

    Cheers
  21. Replies
    9
    Views
    439

    17/52 is far too high Start with 12/54 (34 mph...

    17/52 is far too high

    Start with 12/54 (34 mph or so) and monitor your temps

    Cheers
  22. Replies
    8
    Views
    685

    Motor voltage limit (listed on the can) has...

    Motor voltage limit (listed on the can) has nothing to do with castle suggested use in a heavy SC truck (3s or 4s)

    5s would only be 50,000 rpms and the Neu based motors are good for 60,000
    ...
  23. Replies
    11
    Views
    674

    2200 will be capable of any speed between 40 and...

    2200 will be capable of any speed between 40 and 90 mph

    What voltage do you plan to run ?

    What speed do you want ?

    Metal Mod1 spurs are not cheap, you dont really need them, stock spurs with...
  24. Replies
    11
    Views
    455

    A motors kv rating has no relationship to the...

    A motors kv rating has no relationship to the power it is capable of making, it is simply a measure of how fast it will spin when applied with a given voltage

    Decide what voltage you plan to run...
  25. Replies
    13
    Views
    589

    Dont need the driveshafts depending on how hard...

    Dont need the driveshafts depending on how hard you drive, everything else yes

    Cheers
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4