Search:

Type: Posts; User: bandg

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. I made spacers out of 1/8" aluminum to move motor...

    I made spacers out of 1/8" aluminum to move motor back and fit the pinion. Drill and dremel are all that is needed to make and shape them. The aluminum bar stock is available at most any hardware...
  2. I bought them quite a while back and don't have a...

    I bought them quite a while back and don't have a part number. I don't even remember where I got them. Google search should turn them up. 8T is really slow but I like it.
  3. I have an 8T Robinson Racing pinion on mine. ...

    I have an 8T Robinson Racing pinion on mine. Crawling is no problem.
  4. Replies
    9
    Views
    350

    I remember reading a thread about a replacement...

    I remember reading a thread about a replacement someone here had used already and was happy with it. Can't remember details-never had to replace one myself. It was early this year I believe. ...
  5. Replies
    9
    Views
    618

    Hitec HS7950TH titanium gear, HS 7954SH steel...

    Hitec HS7950TH titanium gear, HS 7954SH steel gear.
  6. Replies
    50
    Views
    2,542

    Nowhere near that loud. Does make some noise...

    Nowhere near that loud. Does make some noise though. Nice to be considerate of others.
  7. Haven't heard of that. Might try just squeezing...

    Haven't heard of that. Might try just squeezing the blade base down some or some 2 part epoxy (might stick though).
  8. Replies
    12
    Views
    1,140

    I use stick on lead automotive balancing weights...

    I use stick on lead automotive balancing weights and stick on lead golf head tape to balance tires. Stays in place well and easy to apply. Never tried clay.
  9. Replies
    50
    Views
    2,542

    Been using the Robinson spur/slipper for a long...

    Been using the Robinson spur/slipper for a long time. Summit and Erevo. They make a high pitched whine at higher speeds, a little growl at slow speeds. Works great for me. They are trucks running...
  10. Replies
    3
    Views
    589

    I don't have both but the quad is really pretty...

    I don't have both but the quad is really pretty easy to get comfortable with compared to all the other tail rotor copters I've used.
  11. Replies
    9
    Views
    718

    Pinions are available below 10t. RR makes them...

    Pinions are available below 10t. RR makes them to 8 I believe. I have a 9t on one now. You do have to space motor back slightly to use them but you don't have to cut the chassis any.
  12. Replies
    4
    Views
    894

    Many people don't like steel spurs and look at...

    Many people don't like steel spurs and look at the plastic spur as a weak link to prevent damage to other components. Also, with the Robinson unit you do not have the option of changing gearing with...
  13. Replies
    7
    Views
    1,713

    After resetting the stabilization as noted above,...

    After resetting the stabilization as noted above, just give it a little throttle to lift up and if it tries to move off vertical then set down and add some opposite trim to correct. Usually one or...
  14. Thread: Shifting servo

    by bandg
    Replies
    4
    Views
    281

    Hitec 5065 digital micro servo is reported to...

    Hitec 5065 digital micro servo is reported to work. No personal experience.
  15. Interesting build. That should be a monster. ...

    Interesting build. That should be a monster. I've been running that pinion with RR slipper on my summit for well over a year now on the stock engine and ebay LVD EVX-2 that I added. Great crawling...
  16. Replies
    38
    Views
    604

    You could remove the spring and heat it to lose...

    You could remove the spring and heat it to lose some tension.
  17. Replies
    38
    Views
    604

    Seems the spring is there primarily to allow the...

    Seems the spring is there primarily to allow the plastic geared servo to survive the load experienced when the shift dog is not aligned inside the transmission when you engage the shift servo. If...
  18. Thread: Locker switch

    by bandg
    Replies
    20
    Views
    515

    If I recall correctly, the channel I was moving...

    If I recall correctly, the channel I was moving the transmission servo plug to (the stock rear locker channel) was not reversible and that was why I used the servo reverser but I could be recalling...
  19. Thread: Locker switch

    by bandg
    Replies
    20
    Views
    515

    After some thought, I think I do remember having...

    After some thought, I think I do remember having to reverse the transmission servo as well but I don't remember if I used a servo reverser or reversed it in the transmitter (I think I used a servo...
  20. Thread: Locker switch

    by bandg
    Replies
    20
    Views
    515

    Switch mods

    I have that stuff all taped up and don't really want to cut it apart. I will sit down and look it over and try to do a detailed write-up on steps shortly. I did this last summer so I don't recall...
  21. Thread: Locker switch

    by bandg
    Replies
    20
    Views
    515

    I used a y harness and reconfigured my receiver...

    I used a y harness and reconfigured my receiver to have the stock locker switch function for high gear up, low gear unlocked middle, and low gear both diffs locked down. I use the stock red high/low...
  22. Mine works as shown in the video but I did have...

    Mine works as shown in the video but I did have trouble getting it to function once. Remove and replace batteries and try it then. I've reset them several times. Model must be plugged in to get...
  23. Thread: sway bar kit

    by bandg
    Replies
    9
    Views
    577

    Seems like you would be heading toward being a...

    Seems like you would be heading toward being a Revo with a much higher center of gravity. Probably wouldn't handle as well as a Revo (especially with stock tires) and wouldn't crawl like it did...
  24. Replies
    7
    Views
    620

    They are lots of fun and mine have held up well. ...

    They are lots of fun and mine have held up well. Seems some people have had problems with motors and you would need some spare blades but I've bounced mine around pretty well and nothing has broken....
  25. Replies
    15
    Views
    1,369

    Try the Robinson Racing Gen III slipper unit. ...

    Try the Robinson Racing Gen III slipper unit. Works great for me. I have one in the Summit and the E-revo. They are easier to adjust for amount of slippage. But even on 4S the slipper is under a...
Results 1 to 25 of 74
Page 1 of 3 1 2 3