Search:

I put stuffed my diff case full of some Hobbie Co Moly grease about 2 years ago and have not opened it up since then. It worked great in my Maxx also. It does not lock it up completely, but it...

Stock Diff. My problem was my slipper/spur. They died within 1 tank of gas. But so far so good since then.

Codfish

It is cleaning it self out. If the track is too short, it may not be clearing it self out, so it is getting rich because you are not getting up to full RPM's. I read somewhere, that if you are on a...

I have only had one since I put in my 3.3. I was thinking the same thing about the air fuel ratio. I guess that is what happens at a mile high! Wait until fall when it cools off a little and then...

It is still early in the day, hopefully he is out having a great day of racing.

Nitronaught,
I would start as kaotikMaxx suggested and go from there. Just because they do list what the PPI is...

You should not have to make up the extra length. No matter what case you are using, it should not make a difference, other than if you had UE diffs, they can be a little funky. I looked at my maxx...

That almost sound like you have 1st gen CVDs. Or are you running stock diffs?

Later,
Codfish

It probably does'nt matter, but I like it. It works better with my fantom works pipe. I stripped and polished it, and it looks pretty cool. There are lots of chassis out there, take your time if...

http://cgi.ebay.com/traxxas-t-maxx-tmaxx-2-5-3-3-lighter-race-chassis_W0QQitemZ6063689127QQcategoryZ44029QQrdZ1QQcmdZViewItem...

You could also watch for the Traxxas racing chassis. I have seen them go pretty cheap on ebay. Here is a link to it. http://www.buytraxxas.com/product_info.php?cPath=2_16_201&products_id=1498
...

Byron's Race 3000 30%.....gonna try some O'donnel 30% next few tanks.

Later,
Codfish

Wow......well any way. I think that either you need to get a hardened clutch bell.....get a stock spur.....if you have the dual disk RRP then get a plastic spur or two for it....and check you engine...

Mine is about 90-100' with a slight drift to the right. Kind of short, especially since I put a 3.3 in there and my brakes do not work so well......had to learn to shed speed in other...

It is all about track time.......practice.....testing.....I would go with a few different setups in mind and go from there. It will happen.


Later,
Codfish

I think you are on the right track. I have raced my maxx a few times, but most of the time my rusty gets to be in the show....any way. Slayden's set up is the way to go, get you maxx down and...

If you want to do it that way, then you should try to buy a roller, and the start from there. At least you would have a base to work with.

Later,
Codfish

Did the same this weekend. I have not had any problems so far. But I have not had one wheelie. But I do have lots and lots of wheel spinnig torque(duh no traction no wheelie lol), even on dry...

That is wild, mine fit right together. You did the right thing by sending them an email, they should take care of you. I love the bulks, they should be great for you.



Later,
Codfish

I have seen some that were totaly messed up, because they had the coating removed. I have two of them in a cabinet somewhere. It is a mighty big gamble, I would just find some silver ones if...

I would either buy a set off of ebay, or go to Tony's screws. Tony's sets are nice, with plenty of extras.


Later,
Codfish

Your stalling problem, is probably a linkage issue. Tank off the airfilter, and watch the carb as you use the radio to work the carb. When you let off the throttle or hit the brake, the slide...

I do not think I have ever gotten a miss labeled part in a package. I agree with DRKDAD, all of my big bores have been that, well what ever color that is.


Later,
Codfish

I don't think they are going to replace the 18......I think they are adding to the line. They would be crazy to replace it.


Later,
Codfish

Read your manual! Most of this sounds like tuning issues. If you cannot figure it out from the manual, then call Traxxas Tech support and see if they can help you get some of this fixed. If you...

There are a whole lot of assumptions going on around here. I would go back to the factory settings, check for fuel leaks, and then try it again. Getting 4 minutes out of a tank sound a little...