Search:

Many people have said it before but I am a full believer now.

My center bearing seized like many others has and melted my center diff housing so I called TRAXXAS Support see what they had to say...

New and clean looks good!!

I dyed mine black also looks a lot better then grey but now after it has seen some racing and bashing it has started to come off in some spots and the grey is showing...

My Proline Silverado body has lasted twice as long as the stock one and still no cracks

If you're new to the hoppy and going to be buying a charger and more batteries might as well go Lipo. I switched and it is the biggest difference not only in speed but run time. Single best...

Problem Fixed! How I fixed it not to sure ha.

I called the people at Traxxas and they said to use another motor and ESC to narrow down the problem to either the ESC or the motor so I could send...

Sorry forgot to mention I whought it was training mode to but when I put it in to training mode it gets even slower.

And It doenst get hot but I havnt ran it that long afraid something else might...

After some time searching and not really know what keywords to use I have come up empty handed

After putting my truck back together I put in my Lipo and took it out for some fun. Turned it on hit...

I wash mine off with the hose after every run!

Then I use an air compressor to blow dry most the water and turn it upside down to finish drying over night, and use spray silicone on the hub...

Maybe a dumb question but if I want more torque do I want a higher or lower number when you divide the bigger number by the smaller number

I just put in my center differntial and had it geared at 54/12 it was alright then I switched to 52/12 and noticed a big difference and would leave it that way except I stripped my spur gear so I...

I skipped the Ultimate and Platinum. The aluminum parts were hard to pass up but I figured for the money I saved I can replace the parts that break with aluminum but I have only broke my front hub...

make the flat spot on the shaft longer with a file

http://i799.photobucket.com/albums/yy271/bodi12_50/Slash/th_100_0756.jpg

Thought about doing it with the Raptor seeings how that is one of the few Fords I would own but Im a Subaru fan and wasn't to happy when he switched to Ford

rjames, random question but what shocks are you running?

Easiest way I have found and have had to do it many times now is use a small drill bit big enough to cut the head of the screw but no make the hole in the body bigger. When the head is drilled and...

I finally got my new lid painted and stickered after a long night of painting and masking. I was a little worried about the quality of these stickers when I ordered them but they are perfect and...

Found this link as I was going throught the forums its the spec sheet for the slayden set up

http://www.ccctrailers.com/slash4x4setupsheetform-slayden.pdf

I started out with the top of the shock mounted on the holes closest in and the bottom farhest out this worked great but when I switched to lipos with a "little" more power I was bottoming out a lot...

Start with the Slayden setup and overtime you will pick up on the things that will work for you. Out of the box the slash is not set up or tuned for a dirt track mostly an all around set up. I did...

Today I made the jump to lipos and I am glad I did. It's night and day between my old
7 cell NiMH and my new Venom 2S 5000Mah 40C.

Went to lhs and was expecting to pay around $150 for a good...

It is possible but extremely hard. I'm trying to find the article I read on it but since its a coxial type wire you have to be able to solder the small wire with out melting the outer covering. I...

I would solder it and save you some $$$$

Just be careful that you dont heat up the wire and run the risk of messing up the reciever from the heat getting back to it and melting it.

I use an...

I know every one is doing Monster themed paint jobs but I found this sticker kit on ebay and had to
do my own version. Not my 1st body I have painted but I'm still getting use to it.

Here is...

Been running Trenchers for a while now and I am loving them. I have been driving on concrete, grass, mud, and the local track thats hard packed with some dust on top and these tires work perfect...