Search:

You are very observant and have a good memory!
I wish you were right about the shelf life but it's an older picture BL-Bob, I'm still dead in the water.

I actually use tire temps. these days. ...

http://i1001.photobucket.com/albums/af139/blacky2kgt/Traxxas%20XO1/IMG_0434.jpgYou are correct. The cars need additional weight in front and on the left side of center.

If you will look closely at the balance pin, there is a dark ring of ring of resistance where the rear mount screw head (for the #6457 Center Bearing Carrier for Driveshaft) rubs on the balance pin,...

TRAXXAS.....................ARE YOU LISTENING! I for one feel TRAXXAS PRODUCTS are top-notch, and I am totally pleased with the look of the wheels, but there is a growing demand for foam tires. It...

Root Mean Square (RMS) indicates the average voltage in an electrical circuit or the average voltage the circuit can handle. Be sure if you are doing the install yourself to pay particular attention...

THANKS insanity!!!

What kind of setup station are you getting? I thought about calling Hudy to see if there 1/8 scale station would work or if they had any plans to build one specifically for the XO1. I even thought...

I think what Gene is referring to here are self-adhesive body post pads that can be purchased from just about any rc shop. You can also just pop off the plastic pads where the body sits on the...

02-19-2012, 07:41 PM #6
bakaguyjean
Tech Fanatic




Join Date: Apr 2007
Location: Atsugi Japan
Posts: 762

Can't wait to see the results. I just about fell out of my chair laughing when I looked at this. I think they were a bit too harsh and that's all I am going to say about that.

Are you doing left-hand turns, right hand turns, or both?

Anything to do with suspension dynamics is right up my ally. Handling is a compromise you give up something to gain something. I'm always looking to learn more so I am very interested in anything...

The 2 braces J.B. (John Buchanan) Welded together adds to the torsional stiffness of the chassis. This makes the whole platform (chassis) more rigid. Anytime you can remove variables from the...

[You are correct, I have not polished the motor fins yet but I have de-burred and polished the motor screws and end of armature shaft.

I use a Dubro Top Spin Prop Balancer ...

GREAT IDEAS!
I have not done this yet on my XO1 but over the years I have used brass or aluminum tubing to make crush-sleeves to fit between the inner races of both inner and outer bearings to...

GREAT QUESTION! 15-20 years ago we could buy it by the stick and cut our own widths. Like you, I have not had any luck either. When searching, don't over-look the fact "tires" might be spelled a...

[/U]Hey Guys!!!! Has anyone done a total dis-assembly and re-build yet? I'm in the process of de-burring, stress-relieving, blue-printing, indexing, polishing, and balancing all moving parts of mine...

Here are a few pictures of my XO1.

http://i1001.photobucket.com/albums/af139/blacky2kgt/Traxxas%20XO1/AXO1.jpg

Powers: THAT MUA Award........ when you get it, send it to me. Mine hit 129 on a test stand (no load). The rear tires ballooned out, got into the tunnels and tunnel extensions. That was an...