Search:

bought a new spektrum DX3s with SR3300T receiver from Amain couple months ago. Hooked everything up and now my throttle totally cuts out. Things I've tried:

Rebinding
resetting throttle limits...

19/90 is a good set up I have tried 23/86 (stock), 19/86, 23/90 and the 19/90 is my fav

they look sweet, gonna order up 8 of the revolution.

yep got the teflon shim. I am not the only one wearing out bearings. 2 other trucks have been doing the same. Track has a heavy right banked turn. Basically you can pin it into the corner and turn...

So I have a 2wd brushless slash with Proline calibers around. I am typically running 2s lipo's with the occasional 3s. The track I run is hard clay with a lot of small bumps and some big jumps.

My...

hmm....well I already ordered all the stuff. I will keep an eye on those c blocks and upgrade to aluminum if needed. I like to do things the hard way

I just ordered rpm axle carriers front and rear, rpm caster blocks, traxxas 5x11x4 bearings and lungsford titanium axle hing pin kit. I went with lungsford because some of the reviews stated that the...

do the big bores use larger diameter shock shafts? or do they just use the titanium shafts same diameter? i am thinking about the rpm 2 stage piston setup

yeah rpm is my choice

I read a review on the ST aluminum caster blocks and seems that the lower hinge hole is too small.

Would the traxxas be a better option?

what is the advantage of the 30 degree ones?

correction, A-arm hing pins

ok I see that ST racing has some hardened polished threaded kit for 15.49, I'll give those a try.

Yeah I will go with the RPM axle carriers and order new larger...

hello,

I am tired of my rear inner axle pins threading out, all though a little WD-40 seemed to help lately.

I was wondering what is a better option:

Lungsford titanium hinge pin kit with...

SPC batteries are top notch!! I have two of the 2s 5000mah and one 3s. I can get around 45mins runtime on the 2s packs each! The 3s I have only run here and there because the truck is crazy fast on it

my traxxas fan seems to have a bad bearing or something. It makes a bunch of noise on start-up, like the bearings are shot and then finds a sweet spot and quiets down and moves air. Gonna take it...

nevermind, found it on a main hobbies for like 9.25

I made this change at the same time I installed the pro-line suspension kit too. Is there an alignment tool I can buy? I did it using a square.

could having my front tires slightly toe'd out be the problem too?

ok, ill try the stock vxl 2075 servo when i get home again, thanks!

i went with the upgraded nitride shock shafts and have good luck so far. the big bores are not really worth the money.

motor heat sink and gear lower if running lipos, helps keep the heat down.
...

yeah its the proline, full ball bearing kit.

i will give that swing on stand and check for binding. i did that when i installed the kit. i am thinking it is the servo.

my stock 2075 did the...

I've got a weird problem with my steering. when driving it in any condition/track I constantly have to keep adjusting my steering trim from left to right. It seems that this started after I installed...

2s is plenty for racing! Pulls wheelies! Haven't even put in the 3s yet, lol. Run time is awesome and charge time for the 2s is around 65 minutes.

I really like the Duratrax charger, once it is...

i'm glad i didn't go with the thunder ac6 for that 50w reason.

I just bought the ONYX 235, let you know how it works. It was 89.99

10-4 copy that