Search:

I see no mention of O'Donnell what happened to that stuff I used to swear by it, but had to switch to Byron's because now thats all I can find around my area.

Clearly these pictures were taking after a total break down and cleaning, probably bought some new parts for them I think, the pictures are from 05' and 06'.

When can we call them vintage?
I broke our my Revo that I haven't put an upgrade on since the 3.3 engine came out and I am still running over all my buddies with brand new trucks etc.
Now I know...

Has there been any Jato 3.3's hit the mid-west Missouri area? I have been waiting on mine for ever, I went to my LHS like 2 or 3 weeks before the release of the 3.3 and had them order one.

I go...

Did you put the servo horn on before you centered the servo? When I take my servo horns off and servo out to clean I always plug my servo in and center then put my servo horns on. Don't know if thats...

You used a 7.2v charger to charge that pack. If I were you Id go an buy something with diff. charge rates for micro packs, so you don't blow yourself up. I never charge my TRX packs over 3.0A and...

I was just wondering if the new Stampede wheels and tires would work in the Jato? I have relay never seen a stampede so I don't know the tires diameter or if the offset will even work. Whats your...

Yeah go ahead and send it to them for repair. I just got one back from them it was doing to samethig worked great for about 1/2 tank and just stop and hardly turn the tires when off the ground.

I use WD40 to clean all my plastic parts. I have for four years now and will continue to clean with it. I just take it all apart and wash all the parts with a tooth brush and dish soap then as I am...

I just preordered a 3.3 from my LHS and I do not want to run the EZ-Start. Can I use the pull start from the 2.5? I know on my 3.3 for the Revo, the case is bigger on the pull stater than the 2.5.

Well maybe that thing is just toast I know with my 1st TM I had the rear bearing got rough rusty some how and was sending rust chunk's everywhere in my engine and they seized to the head and...

Do you have fuel coming out from the glow plug? maybe theirs a leak around that, how about your fuel tank o-ring?

What other fuels can you get your hands on? I know I had a time with my 2.5R when...

That's pretty hot I had some over heating prob. when I switched to the Trinity pipe and had to richen the HSN 2 1/4 turns out from factory settings. I would richen the HSN considerably. The fuel that...

I would try to bring your shift point in a tad and it sounds like your HSN is to lean causing the stalling out. If you have a Temp. gauge post some temps.

I am running the Trinity pipe on my 3.3 and it a bit loader then the TM I have w/the Trinity. The 3.3 sounds killer when your in the middle of the power band and start nailing the throttle. But after...

Looks nice but a bit clobered to me. Use should spend some more doe and loose the elect. boxes.

Got the 3.3 yesterday and mounted her up... To bad its going to rain till Sat.

http://i2.tinypic.com/qzkf1i.jpg
http://i2.tinypic.com/qzkg1z.jpg
http://i2.tinypic.com/qzkhhj.jpg

I wouldn't cut off the extra steering arm I did that and two days later I broke it. I could have just flipped it around and used the other side. JMO:cool:

I need to buy re-placement reciever for my revo and I was going to buy the two channel sence I don't need the third one. What does the Traxxas 27MHz Receiver w/BEC and Non-BEC mean?

I was looking...

Just checked my e-mail. My 3.3 should be in 3/7/06. I did the ERP so you that are wondering how long it takes you to get the new engine its about a week and three to four days. I Fed-Exed my 2.5R off...

I kinda notice the same thing the owner of the hobby shop I go to in town is a Savage freak he don't talk to highly on the Traxxas products and I always here about this Savage and the new HPI he...

I Fed-Exed my 2.5R to traxxas and they got it in Friday and I have been checking my bank acount to see If I have been billed for it and nothing as of yet. Will see what tommarrow brings cause that...

Thanks EVLtwin yes that helps out a lot... Thanks for taking your time and doing that much appreciated.

Dang... Thanks for the info. I don't plan to run this body much at all if any. If you could or have the time to get the measurements of the hood, side, tailgate, and the bed that would be killer I...

Good lookin truck... What kinda program you runnin with that plotter? I am running Sign Wizard with mine? I few years back when I got out off school I was making more in just a few days cutting vinyl...