Search:

Type: Posts; User: Bekind2yourbuds

Page 1 of 2 1 2

Search: Search took 0.15 seconds.

  1. So my question is I will have to replace the...

    So my question is I will have to replace the carrier and the bearings to the larger Ones to fit the t-maxx axles but do I need to do anything for the transmission side output shafts or will the...
  2. What modding needs to be done to fit the jatos?...

    What modding needs to be done to fit the jatos? Might just try that right off the bat. I have a few of the busted stub axles and joint balls around.

    I do have the slipper clutch adjusted to take...
  3. I'm gonna try the 4wd hd rear axles ad see how it...

    I'm gonna try the 4wd hd rear axles ad see how it goes. Been twisting them with both the 2s and 3s after I threw the wide kit on so I might have to try and see if there is something going on that...
  4. Pede with Proline wide kit breaking stub axles help!

    I have a XL-5 stampede that I threw a 3800MMP motor/esc in. Run 2 & 3s lipos in. Had no problem but just set it up with the proline wide kit. Handles awesome now but keeps breaking or popping out the...
  5. *UPDATE* Got everything delivered, after a...

    *UPDATE*
    Got everything delivered, after a small thing here and there got the 19t pinion in and got the tranny case machined to fit the 33t pinion. Had an issue with the motor running at higher...
  6. Knocked down the set crew, threw the pitch back...

    Knocked down the set crew, threw the pitch back on the end and called it a day. Worked great, should have just been doing my own customization/building from the beginning. Thanks for the info...
  7. Yeah I was thinking of trying a shorter set...

    Yeah I was thinking of trying a shorter set screw. might have to make a trip down to the local hardware store
  8. Running a 19t 48p pinion and the stock stampede...

    Running a 19t 48p pinion and the stock stampede 86t spur. I picked up the Hot Racing 19t, 48p, 5mm shaft pinion gear. I was thinking the best thing might be to make a shim out of a plastic 1/8 thick...
  9. I tried putting the pinion both ways and it hits...

    I tried putting the pinion both ways and it hits either on the inside of the spur or the outside of the spur depending on the way I install it. I pushed the pinion farther down the motor shaft past...
  10. Pinion gear hitting the spur gear. Any thoughts?!

    I bought a mamba max 3800 brushless system for my 2x4 Pede. Picked up the 5mm shaft pinion gears as the new motor needs the 5mm size. I am having an issue with the new pinion set screw hitting the...
  11. Picked up the Hyperion charger, a 2s 5400 50c and...

    Picked up the Hyperion charger, a 2s 5400 50c and a 3s 5000 50c spc lipos, a 19t and 33t 48p pinon gear, and the battery expansion kit since I found it for a buck on ebay with free shipping. Gonna...
  12. Replies
    4
    Views
    557

    I ended up getting the 48p gearing so I would not...

    I ended up getting the 48p gearing so I would not have to change the stock spur gear as well. Went with a 19t and the stock 86t for bashing and a 33t for speed runs. Gonna use the stock 86t spur for...
  13. Replies
    4
    Views
    557

    need advice on gearing 5mm bore

    Just picked up a new brushless motor with a 5mm shaft. I need to get gearing to fit the larger shaft size. Any suggestions on where I can pick up some 32p or if I have to 48p pinons? Also, probably a...
  14. Cool, Thank you for the info guys!...

    Cool, Thank you for the info guys! Pavementsurfer, I was thinking the same thing that it would be equivalent to the Dynamite now and if I can figure out how to get my old laptop power supply to work...
  15. OK guys thoughts on these two charger. I narrowed...

    OK guys thoughts on these two charger. I narrowed it down (I think) between these two;
    HYPERION EOS720I NET 3 AC/DC BALANCE CHARGER 7S 16N $129done
    or
    Dynamite DYN4064 Passport Ultra AC/DC...
  16. Hyperion EOS 0720i NET3-AD vs Dynamite DYN4064 Passport Ultra

    Looking to buy a charger today!

    Any thoughts on the Hyperion EOS 0720i NET3-AD Li/NiMH/A123 Balancing AC/DC Charger (7S/20A/150W)? $129 done

    or

    The Dynamite DYN4064 Passport Ultra AC/DC...
  17. What are you gearing your stampede at?

    Looking to get some input on where others are gearing their pede's. I am running a Mamba Max Pro SCT 3800 combo and looking to gear for some speed runs as well as gearing for bashing.

    Want to be...
  18. Help, looking for a cheaper lipo charger

    I am looking fr a cheaper Lipo charger, something that can charge up to at least 4s 5000mah lipos. Like to keep it under $100 but if there is a charger a little more than that but is very much worth...
  19. So Tower hobbies finally called me back about the...

    So Tower hobbies finally called me back about the system and what price they will give me. I looked up the kit they referenced and it appears to have a 3.2mm shaft....
  20. Have any of you guys put one of the 2s or 3s SPC...

    Have any of you guys put one of the 2s or 3s SPC packs in a xl-5 stampede? I don't know which ones will fit.
    What size should I get in terms of cell count? 25,30,40...?
  21. Nice, thank you Digger. What are you looking to...

    Nice, thank you Digger. What are you looking to purchase? I have found a few packs but they are hard to find in the 4000mah+ size that fit the Stampede.
  22. Best cheaper Lipo battery & charger for a Mamba Max 3800 system in a 2 wheel Stampede

    Just ordered a Mamba Max Pro SCT 3800 brushless system for my 2 wheel drive Stampede. Looking for some insight on what Lipo batteries (2 and 3 cell) I should look at purchasing as well as a charger....
  23. So Tower Hobbies will only step up and give me...

    So Tower Hobbies will only step up and give me the Mamba Max SCT race pro combo (Mamba Max Pro SCT ESC and Neu-Castle 1410-3800kv motor combo) for $174 plus tax/shipping. Still a good deal compared...
  24. Called in this morning to talk with the manager...

    Called in this morning to talk with the manager they told me yesterday would be waiting for my call. She was "out" and did not mention when she would be back in. Hahaa. Total shakedown man. They...
  25. Nope, no email confirmation. Ordered it, rolled...

    Nope, no email confirmation. Ordered it, rolled out for a weekend away, checked my email on Monday to nothing still. Gave them a call and the rest is there. Went threw a few reps today to speak with...
Results 1 to 25 of 48
Page 1 of 2 1 2