Search:

The non-Traxxas support question(s) have been removed.

The type of support sought by this post was of a non-Traxxas nature. Please contact the manufacturer of your battery packs and/or charger for...

traxxas big bores are good shocks for jumping etc because they are nice and smooth and i think strong but piggybacks look good and are good shocks untill they start to leak

wow what a story glad to hear you found it

i have never had any problems with stock shaft on 6s lipo maybe if you install steel drive shafts you will start to destroy diffs?

Make sure the half shaft screws or cvd screws are tight as sometimes then can come loose and catch

i have dual rate springs on traxxas big bore springs and 60w oil and seems to be fine for smaller to medium jumps :D

i have rpm a arms with traxxas hubs and cvd's and no problems

i would go for some cheap 5200mah 7.4v lipos from HK it takes about 3 and half weeks max to arrive in uk wich isnt that bad if you forget about it, i use this charger it works well can can charge to...

ok Thanks for your help

What type of connector do the titan 550 motors have on them im afer buying new ones, also what gage wire is it. Thanks

best way is to just push a 2mm allen key through the tyre in 2 or 3 places ive done it to most of my tyres and lets all the water out and none of my tyres have ripped

best go for the newer e-maxx with water proof esc and get 2.4ghz radio if you can

Hi, guys found the "aching" problem a chipped tooth lol yeah the tooth in the diff had chipped and then the chipped part damaged the other teeth :S i did a video of the click when the diff was...

the soldering can be tricky because the ******* 5200 30c lipos batts have realy thick wires and you will have a *** on getting them to go into the traxxas connector houseing it took me ages to do haha

make sure that you tighten the little grub screws down onto the flat spot on the shaft from the motor because its sounds a little bit unusual that bouth should come off at the same time

thanks for help im going to have a look at it as soon as i get home on friday, i already have a diff spare so if i need it its there, i dont think that it is the diff because useualy it would have...

nice trucks

it should be fine it is just there to help prevent dirt and grit from getting into the splines of the drive shaft

Hey,
I have a traxxas e-maxx with mamba monster running 4s and it is clicking badley it sounds like it could be something like a drive shaft pin coming loose and catching or the rear diff before it...

3.3 is quite a good engine, parts are easy to get hold of from ebay for good prices,

as said the engine could be overheating things you could check is if the glow plug washer is installed correctly and the glow plug is tight because it could be letting little bit of fuel out to the...

make sure that your throttle trim is set to 0 and try again or try re calibrating the transmitter to the esc

hi where did you buy these wheels and tyres from i also live in uk and know how hard it is to get these sort of items, thanks

the snow is here in the UK and im wanting some advice on what to do on changing to a water proof system, im not interested in messing with the mamba monster esc trying to water proof that so ive...

ive managed to get it sorted out by downgrading the firmware but i still dont understand how newer firmware would cause this problem.