Search:

this is DEFINITELY going to be my next body for my Slash. only concern I've got is how that body is going to cope with the wheelbase change the 2WD slash has due to the front kickup.

...and stuck it to my mod slash racer/basher, and I think the result came out pretty good! This was my first day driving on a proper off-road track, and considering I was keeping pace with a 10.5...

I would definitely like to see this as a kit or a roller, since I run a Spektrum and those receivers aren't cheap and I don't really need any more old traxxas 27mhz receivers laying around unused
...

are the arms shared with anything else, or are they unique to the 4x4 Slash? I'm REALLY excited about this thing, it just looks so sick, and it with all that power and 4WD to put it down, I would...

thanks all, it was almost a bit of a spur of the moment decision. I had originally bought this body to go on my losi MLM (using a part for it's intended use, what a concept eh?), but then I had the...

HPI Vintage 26mm D compound tires on the vintage 5 spokes.

most definitely, hack off the splitter area and the little inset above the splitter, run a slightly less obnoxiously large rear wing, trim out the rear bumper area to get better airflow and lessen...

... but it isn't as a trophy truck/baby SCT :D
http://img200.imageshack.us/img200/3189/p9050018.th.jpg
http://img200.imageshack.us/img200/6889/p9050020.th.jpg...

no, but I'm reasonably sure that bodies for the Scorpion would fit. and Pro-Line makes a VW bug for the Scorpion. baby Class 5 anyone?

I'm a corner-carving junkie I guess. I like fast, but for me, that speed has to be accompanied by the ability to turn a corner without ending up on my lid. not at full speed unless it's a sweeper,...

I borderline swear by those on my larger scale stuff. that would be my first idea

I think that a sway bar would be one potential solution to this. it would make sense to drop down to 10K oil in the diffs, since that will unload teh inside tire before the truck gets too far gone....

I was bashing my new VXL mini slash today in the street, doing speed runs, and I noticed that the suspension pitches around a lot in the corners, leading to many flips. I'm going to be roadracing it...

is 1956 old enough? the Parma Midnight Pumpkin repro body should be a direct fit.

the plastic is dyable, yes, but I'm not sure what effect the dye or the dying process would have on the foam.

it definitely looks cool with the TC meats, but I wonder how it would look with...

well, a member on another forum has gotten the measurement for me. the knuckles are roughly 1.5" tall, which means that Tamiya M-chassis wheels MIGHT fit, with heavy emphasis on the might. but, if...

now that those who have been asking for a video have gotten one, any chance I can get an answer to the question I PM'd you a week and a day ago? I've never been very fond of being ignored, I know...

the wheelbase is 14mm too short and it's around 50mm too narrow. in simpler terms, it definitely would not fit

the Celica body is a reproduction of the original body, and going off the specs for the Celica Gr.B listed on tamiyaclub.com list the overall width of the car at 172mm, with a 211mm wheelbase, which...

for the mini slash owners-to-be, the Parma Midnight Pumpkin reproduction body will for sure fit. width and wheelbase match up within a few mm
EDIT: if you find a way to stretch the WB by 5mm (I'd...

motor length isn't the issue here. motor diameter is. if the motor is too big around, it won't fit. plain and simple. plus, a big brushless setup is going to require bigger batteries than will fit...

lets try out a Great Planes 28-56-3200. it's a small-ish airplane motor, but it's small enough diameter that it should fit the stock motor mount. oh, and the wattage output is simply insane (it will...

I'm going for a Spektrum RX (SR3520 preferably, but a SR3100 would do as well), a Parma Midnight Pumpkin repro body, HPI Vintage 5 spokes (26mm wide, flat chrome finish, with the spokes and center...

baby slash + losi mini late model body + HPI 30mm wide, 40 shore rear TC foams (part number 4365) + esc capable of handing 4s of lipoly + 28-45-3600 motor + out-of-the-box gearing = theoretical top...

I can picture AE taking their RC18R platform and stretching it a bit and dropping a CORR body on there. losi, I could picture them doing a mini desert truck (well, another, if you're just going off...