Type: Posts; User: jpure009
SCT/Sidwinder ESC, is suggested Max 2s, but the 3800kv is max 3s, so u will need 7cell NIMH or 2s Lipos with that setup.
You can get the MMP/3800kv and run 3s, but they are not sold as a Combo yet....
decent lil track you got there, have fun.....
Do you have access to build whatever you want there??? All that material I see in the background&all of that room!!
You should hook up something...
is that both Metric? for the grub screws, that go in the pinions??
Or is the Traxxas ones 1.5mm Metric AND Losi&Robinson 1/16th SAE??
Its hard to tell by eye. I put on the 21pin...
just order a a few pinions from Traxxas, or LHS and get Traxxas!! (order form in manual/parts list book)
---They have 15,16,18,19,23,25....That is all you will need for now.
You have a...
yea figured that out tonite....thx
I get it, if it's under the piston, then the car will sit lower. THX
If I want my rear to ride a little higher, can I take out the limiter that is in my rear shocks stock??
Or does the...
Wouldn't a Limiter give the F/R a higher ride height?? Not lower??
Doesn't it Limit, how far the shock can compress??
I would think that would create a higher ride height?
Yes, I forgot to mention, I did use a hairdryer, but only for a few minutes.
It didn't really need it, it dried so quick, by itself.
Pactra paint is fantastic.
No dripping or running&was dry in like 3 hours!
I use Pactra on a JCCONCEPT Stand that I painted & it dried and was able to be use in like 3 hours!!
I made it a yellow&black CC stand, looks great!!
No dripping or running, this was fantastic...
what do u use the Limiters that came in the RTR box/kit???
Where do they go, in the rear shocks only, or can u put them in the front??
Where on the shock do they go, between the piston/eclip...
Always find out what the other guys at the track are running. That is how to find what tires are best for that track.
I would suggest the AKA wishbones. They are for Hard packed dirt or hard...
I have the 2wd now, but am seriously thinking of getting a 4x4.
I have the MMP&will be putting it in the 4x4, when I get it. I will also be putting in the Novak Ballistic 550 motor, but I didnt...
Slipper adjustment & gearing has a lot to do with wheelies. And, of course, I hope your talking about BL motor??
I doubt you will wheelie with the Titan12T.
-Tighten up your slipper to like a...
What do u mean ducati?
Why would going with 90/23 rather then 90/19 give more torque?? it has been running 10degrees hotter with this gearing, but not a problem. It seems to limit the torque...
I think your correct ducati,
The bottoming out issue is more towards the tires slamming the body, not the bottom hitting the ground. I have seen other ppl bottoming out after the jumps, so i...
1st off a link to the track.
....LOL that's me, who put my truck down at about 2mins, flipped it on jump#3, I believe this was 1 of my...
If u guys were asking me?
I was, at the time running 90/19, but have recently changed to 90/23, to limit the torque on the 3800kv CC motor. As well as many adjustments to Castle Link. I have...
You can get the same effect as the RPM pistons, by drilling the holes into a cone shape. That is what the 2stage RPM pistons are for. U get a stiff shock when landing and quick rebound,...
The Trenchers are big tires with large/thick thread. They are ok on street, and they are labeled All-Terrain, but your not going to get the best Traction with them. The are really good on...
Lipo batteries = Get a 2s 5000mah 25-30C LIPO.....If you don't care about blowing brushed stock motors after a while, then you can run all 2s LIPOS and an even higher "C" rating if you want more...
I usually leave the LVC at 3.2, but I think I am going to change today.
3.3 or 3.4v/per cell sounds better. My Lipos, have been putting in too high of %/MAH while charging.
THE LVC was at 3.2,...
So, do i have to Sand Eclips&the rpm pistons, to get them to fit in the Stock Shocks?
I'd rather not have to do that, I guess I can use a drill&drill the holes (stock pistons)into cone shapes..?.....
At the track today, and I put in my new battery for it's 2nd run every.
I didn't start the Stopwatch till about 3 or 4mins into the run with this battery.
I was at the track below, and probably...