Search:

Type: Posts; User: wiscnitro

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    20
    Views
    818

    I'm only going with a 4s for now. with the...

    I'm only going with a 4s for now. with the current gearing i'm estimated at 45-50mph. that dosn't sound like a lot of speed but on the other hand my Revo weighs way more then a "standard" revo and...
  2. Replies
    20
    Views
    818

    Here's mine. I got the Steel RRP (wide) gearset...

    Here's mine. I got the Steel RRP (wide) gearset and the RRP gen 3 slipper so it's staying a 2 speed for now. I got it finished soon after these pics I just need to take more, waiting on warmer...
  3. Replies
    7
    Views
    799

    How to set up Camber links / knuckles

    I don't know the proper way to set up the Steering knuckles / Camber knuckles, Do you screw in the ball studs all the way then tighten down the plastic insert (not too much so the suspension dosn't...
  4. Replies
    3
    Views
    749

    I have the 3 Racing shocks with the aluminum caps...

    I have the 3 Racing shocks with the aluminum caps that have the hole drilled in the cap. i'm just missing the bladder under the cap figured I would need the full kit just for the bladder but a...
  5. Replies
    3
    Views
    749

    Were to find the shock bladders

    I'm looking just for the bladder that sits on top of the shocks just under the caps I don't need a full rebuild kit. I don't know the size or what would fit. Perferablly off Ebay since its all I...
  6. Replies
    3
    Views
    560

    Replace it with the plastic, Gear mesh might of...

    Replace it with the plastic, Gear mesh might of backed off or slipper was a little too tight
  7. Replies
    2
    Views
    302

    Another gear ratio question

    Since I decided to convert my 3.3 Revo to a BL im trying to find what gearing is a good place to start. the Transmission has a full RRP gear set with a 38t 2nd gear. I am also using the RRP gen 3...
  8. Replies
    4
    Views
    837

    Yeah I realized I cant do the same mod with 23mm...

    Yeah I realized I cant do the same mod with 23mm hex. I got them shimmed way out and when I tighten down the hex i'm snaping the axle pins before I get the wobble out of the hex. i dont know if its...
  9. Replies
    4
    Views
    837

    the 17mm adapter slop mod

    I am running 23mm adapters on my Revo but they slop around just like the 17mm do. I know there was a mod about drilling out the center and puting in a sleve of some kind. anyone have a link to the...
  10. I know the advantage of locking the transmission...

    I know the advantage of locking the transmission to use motor braking would be the best but there is something a little on the "cool" side of keeping the disk brake. My TG350oz servo will help a bit...
  11. Performance brake disk same as standard?

    I seen a traxxas makes a performance brake disk (vented) for the revo. has anyone purchased one and noticed a difference in stoping power? im converting over to BL power so the stoping would be nice...
  12. Replies
    28
    Views
    4,292

    Ive seen 2.5 diffs hold up to MMM power. shim...

    Ive seen 2.5 diffs hold up to MMM power. shim your diffs properly and its all about how your driving it as well, hows your slipper adjusted and your gearing.. if you already have the diffs and want...
  13. converting over to E- experienced converters

    Happy 2012 everyone:thumbup: I had a plan to convert my ex big block revo over to BL power I am a bit woried if its gonna be too much truck for what I want to do. Little insight. its a 3 racing...
  14. Replies
    2
    Views
    470

    Making the conversion

    Moved to E Revo area.
  15. Replies
    7
    Views
    591

    Nope they read the same for each engine

    Nope they read the same for each engine
  16. Replies
    7
    Views
    591

    I use this one. works just fine for me...

    I use this one. works just fine for me
    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMG5
  17. Replies
    0
    Views
    544

    big block revo

    Selling my big block Revo. No trades ,
    3racing chassis , rpm arms, aluminum knuckles, rrp trans and gen 3 slipper, 3 racing shocks, lundsford links all around , 23mm moans steel cvds all around,...
  18. It's all personal experience :) but I ran the JL...

    It's all personal experience :) but I ran the JL Red Dot with the Resonator and it performed very well. I went to a bigger pipe and the engine just felt "flat" I think there were 2 resonators made I...
  19. You can pull the starter off and LIGHTLY oil the...

    You can pull the starter off and LIGHTLY oil the spring, pull out slightly and very carefully. If you pull too far the spring will uncoil on you! Just a drop or 2 in the gap. And yes to everyone else...
  20. Replies
    10
    Views
    636

    That old on stock carbon shoes if that's what you...

    That old on stock carbon shoes if that's what you have I would replace them with a 3 shoe system, stay carbon no need for aluminum. The 3 shoe is a much tighter engaging clutch. You can also step up...
  21. I wouldn't worry so much about the head shims as...

    I wouldn't worry so much about the head shims as the heat to the sleeve or rod. I would check the head bolts in a star pattern and make sure there still snug. I loctite mine. The problem would be the...
  22. Replies
    10
    Views
    636

    Like anything on the revo, everything needs...

    Like anything on the revo, everything needs breaking in. When you start putting power down the slipper as you learned will loosen up a bit. Not a bad thing its easier on the driveline parts till its...
  23. I'm no pro. I get my tune close and its good...

    I'm no pro. I get my tune close and its good enough for me. Good enough to make good power
  24. Personally I don't have any hands on experience...

    Personally I don't have any hands on experience with the .30 but I've heard its got a little more bottom end. The only other engine I ran on it was a Axial .32 RR-1 and that is all torque! It's also...
  25. LRP Z.28 R ...

    LRP Z.28 R
    http://i923.photobucket.com/albums/ad75/rcracer_2009/IMAG0007.jpg
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4