Search:

I've had the tranny all apart and replace high gear a while back, gears are good.

I just posted a reply to another post on this subject might check it out

Guess I can't post pica from my phone???

http://s1100.photobucket.com/albums/g416/Buschwacker77/?action=view&current=2013-01-23_17-50-31_391.jpg

Im running a 1/16 2011 camaro rally body on mine made by proline. I wish I could figure out how to post pics cause it looks really nice, but what can I say im lazy!!! Its a little short and required...

I bought a piece of hollow aluminum square stock the same size as the square piece that fits inside the transmission, I cut the piece maybe 1/16-1/8 longer and that made a world of difference! !!...

Are your tires bald??? Mine doesn't always do wheelies with bald tires on slick pavement.

I have an issue, from time to time my jato seems to get stuck between gears like its in neutral or something. Primarily when im warming it up to run for the first time. It shifts into 2nd but when I...

OFNA glue works best for me.

Got my son a 2.4 TQI transmitter and reciever for christmas, when he installed it and reprogrammed everything for use in his JATO, he said he gets a chattering in the throttle??? its all brand new so...

Fuel is maybe a month old 3/4 gallon traxxas 20%, kept indoors. Traxxas 3232x plug, its all I run. Everything mentioned I had apart cleaning and replacing when I put in the new piston and sleeve. Ran...

I broke in with temps in the 60's, wrapped the head with a childs sock, temps at break in 210-225. Max temps now around 235, and yes new glow plug as of yesterday. You sure it could be lean???? Its...

Ok so I just broke in a new piston and sleeve on my 2.5r. Took it out to tune it yesterday, idled and ran low rpm just fine while it warmed up (in the low 40's here in Texas). When I would give it...

Ok im about to replace the piston and sleeve in my 2.5, what brake in if any should be done??

Jato uses bearings in the front wheels, the slash has 14mm hex wheels all the way around, like the wheels on the rear of the jato. There is a mod to convert the jato to that front setup. Check out my...

You sure your meshing the gears properly??? Also make sure your slipper is adjusted properly, you shouldn't be stripping that large pitch gear like that???

I run my ez start with a large 7800mah 7.4v lipo that I have for my slash vxl. I can crank all day long without worrying about it discharging too much....

Im running my slash street fighters on the rear of my jato 2.5 and I love them. They have more side roll because the sidewalls are taller but they work great of coarse you'll have to do the mod on...

Thank you, I have had carb issues ever since I got it. Beach sand all in this thing, I tore the entire car apart, I mean ever bolt on a jato and 2.5, runs alot better and shifting. Still need the...

Ok for most of the other issues sorted out now a new one. After making 2-3 really good fast runs my 2.5 dies, takes about 2-3 minutes to refire?? It acts like its starves for fuel and just quits???...

Get some proline trenchers!!!!!

My jato doesn't seem ti be shifting up or down at times, I have adjusted it both up and down. It does work at times but is there a reason it would get hung in gear??? I think this is causing me to...

Thanks wolf, thatswhat I was looking for

Ok no response??? Well.how about this, I tore the carb apart on the 2.5, found the larger end plug was stripped out and leaking fuel, also I was leaking fuel from the base of the hsn. This motor has...

I just bought my second jato with a 2.5 in it. They are both well used but in really excellent shape. One is a 2.5R the other is a plain 2.5, what is the difference between the 2???? Also the plain...