Search:

Which is the material of the actual pads ?

Why the alluminium is supposed to be better ?

thanks

I think that's insanely an high price, $510 ????

I would simply add 200$ and buy a second complete RTR erevo BL.

I think they went definitely crazy.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXVHA5

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYJJ5&P=ML


200$ dollars of difference for what ????????


Thanks

There is a little play I agree but after months of track hard sessions I have never had a single differential issue.

You have to take care about their cleaning and lubrication every 5/6 runs and...

Yes, both steering and throttle trim are at zenith position.


Then, thanks for your inputs , I have already seen that MMM document and it states " flashing yellow " -> " possible problem with...

Nope, I have tried to rebind the Tx and the Rx 3-4 times to no avail. Always same behaviour.

I have tried to recalibrate the Tx but it doesn't accept the inputs.

I have also unplugged the servo...

Now I'll try to rebind it with the castle manual on hand and see what happens.

Thanks for now.

I have a single servo but it works fine even now that the ESC is out of order with the throttle.

Hi,

I have searched extensively into the forum and I found several posts that seem to confirm I have an ESC issue.

I have been using it since several months with no issue. I have 1.20 on it and...

Do e-bay ones have stock oil inside ?

If yes I am under the impression you have somehow to " rebuild " them from scratch the same, despiting they are already built. This to fill them with your...

LOL, reading the thread's title I thought about myself and my R/C hobby : " Yes , I have a problem " :D

Usually on my servers huge racks at work fans " help " the air to follow the nature physic rule that leads the air to climb up when hot, therefore for " up " I mean " force " the hot air to do its...

I changed the fan 2 months ago with a Castle one, maybe I put it reversed than stock... <_<

I prefer this way anyway, just like CPU ones....

Or I mounted CPU ones reversed as well ?? :)

If I recall right my ESC fan push the air upwards.......when I put a finger over the running fan I can feel the air pushing up.

Yep you are right about the alien way of probing....

Probed men are only allowed to let few tear drops fall :eek:

There are too many discussions about brushed motors and NiMh compared to BL and lipos.

IMO they should keep on being separate, at least for the above mentioned reasons that may confuse who is...

Rumors report that Revo1 has been kidnapped by aliens that are trying to retrieve ERBE secrets from him. Other aliens wanna exploit earth ebay therefore are probing his mind the same for his super...

One of my 6 3s batteries always shows a lazy cell. It keeps on discharging itself slighly more than the 2 remaining cells , not much, but when 2 cells are around let's say 3.85, the lazy cell is...

Thanks for the link.

Is the 1.21 mandatory to upgrade to 1.22 or I can go straight from 1.20 to 1.22 ?

thanks

Thanks for the info, I think I am now obliged to use the beta firmware to set a 3.2v with auto-lipo right ?

Voltage apart, which changing does the 1.22 beta bring ?

thanks

I have just bought 2 2s to add to my 3s. I am now obliged to set auto-lipo in Castle software to swap batteries during track sessions with a single ESC set good for both 2s and 3s.

Which is the...

Sorry but I can't understand. If the 2.4 receiver

http://www.traxxas.com/products/electric/erevo5608/details/24GHz-receiver.jpg

has only male pins and the transponder fits directly into it I...

Could you please point me to the cable that has to be inserted into the erevo Rx and it comes out in order to work as an extension to plug the transponder without opening the Rx ?

Thanks !

You have got one pm 1stGenCRXer.

Thanks also to Revo1 and others, I'll give that link a try too.

Hi All,

I know there are several artists floating here in the forum. I would like to buy this body http://www.prolineracing.com/p-664-slipstream-clear-body-for-e-revo174.aspx but I am not good on...