Search:

yes, you could have over heating issues

not necessarily, since it uses a different base than the slayer, it will have its own separate issues.

with a higher torque servo, a single servo should have no issues with turning your tires. 2 servo's will have a very slight advantage in that it puts less strain on individual servo's.

if you go with the jato, I would consider upgrading the braking parts, there is a steel disc out there

you want to look at the torque rating and speed. the first will the strength output of the servo, while the latter affects response time, by telling you how long it takes to turn 60 degrees. On my...

you could consider off setting them, an upgrade to the servo is never a bad idea either and the parts are easily available to make it a dual servo system, and if you wanted to be really creative put...

I have both the Jato and the Slayer. once you put the sway bar kit on your slayer, the tippyness is almost completely gone, and I run mine on a lot of different surface types. My Jato is a...

everyone that asks for input, should include a bit of information, like what they want to use it for, and the surface it will run on...if you just want something new, try out the rally out maybe?

So I am studying culinary arts, and want to travel to different countries to study the local cuisines. I studied a bit of German at a university but had some trouble picking up on it. I know its...

that is awesome! Im right there with you...if the world ends, there will be first off nothing we can do to stop it, if we can not even accurately predict what may happen....so worrying is a waste...

University of North Dakota vs University of Minnesota-Mannkato. bout 5 years ago. Absolutely ridiculous fight broke out between all players except the goalies. Do not remember what started the fight...

you sell your project car to get parts to upgrade your RC builds!

Im not quite sure what to make of the slash's new nitro platform. It has a metal single gear transmission, which many have asked for, for quite some time. But that seems to be the end of the...

also, how old is your engine? a worn out engine may not properly hold an idle

on the first forum page, scroll down till you see traxxas engines...the top thread in that forum is about tuning your engine. should help you reset your gap to get your idle better. I had the same...

your entire wish list on amazon has nothing but rc parts

many of the parts I listed are offered from traxxas themselves. as far as bead locks, PL has some for the slayer, but make sure they are slayer, my store only stocks slash, which uses a smaller size...

if you want to beef up the engine you could look at upgrading the exhaust, the carb, and the header. Tires will help out quite a bit in the traction department. You can also consider a rear wing...

Same with me, I would love to see some of the sites there.


He stated earlier that the kid was already in and out of jail. I have to agree that there is a point where one can learn a lesson and...

you will have to compensate for any altitude change, the Carb uses pressure to atomize the fuel, by removing too much oxygen you will eventually starve the engine and it will stall out. until that...

you should always be ready to rebuild the engine on a used buy. outside that, if its local, try to have them run it, check the electronics. but $175 is not a bad price for a good roller, much less...

I too absolutely love to just experiment, since it really does come down to your driving style/ability. if you want a good idea of a "basic" set up, check pit pass, slayer set up. it gives a good...

no problem, many of us newer ones run into the same issues :) if you continue to have the issue, try changing your shift point. if that does not fix the problem let us know we'll keep...

You Bought That For Your Girl???? THATS FREAKING AWSOME! sorry just wanted to say...

im thinking from what you are saying, and what im looking at...traxxas has something possibly wrong...1)5411 is not required to mount 5998 to the slayer pro, and 2) if you get 5411, they need to...