Search:

Those are durability parts and not must haves for your driving style. Tbone rear bumper or Tbone wheelie bar would be good. Maybe look at tuning your shocks as well. Since you are running a pretty...

Motorstuff, they are the same truck so any upgrades for the slash are also for the pede.

Did you try just tightening the spring all the way down and run it. I wouldn't recommend keeping it like that, but just to test it.

I don't have a video, but there is zero ballooning on 3S with my trenchers. Yes, you get more top speed with ballooning, but that can also cause heat issues if you are not geared properly for the...

Those are the right ones. MIP and Tekno both have good quality, fit and warranty.

The first link is for rears only, the second is front and rears. Or you can get Tekno front and rears for $68 Link

Same reason I use plastic knuckles. I like cheap parts to break.

I have had my Trenchers taped for over a year with no issues. I have had to take a couple tires off the wheel due to stripped hexes and the tape is still holding as good as new. I used two wraps of...

I buy most of my stuff off eBay, including driveshafts. You want MIP X-Dutys or the Tekno M6.

Peter, I meant this:
By popular demand JConcepts is bringing the Rulux 12mm hex design to the most popular group of vehicles on the market the Stampede 4x4, Stampede and Rustler 2wd.

I know it's...

You needed fronts all the way around. Longer hexes will help but still not be as wide as stock and still may rub. I made the same mistake when I first bought my rulux wheels. JConcepts mentions the...

You should have ordered two sets of 3340B rulux. If not, you have the wrong wheels.

Fronts are $42 at tower. Front and rear are $68 on ebay. If you can swing it, I would buy both and be done with it.

Or a Jang shapeshifter?

Not sure if warranty extends to the clear cover. If they will warranty it, I would ask for the black version.

Here are the tekno rears....

All you need are aluminum caps unless the threads are worn or damaged from the caps popping off. STRC caps fit the best. Others will recommend new shocks, your money, your choice.

The most durable way is to replace your shafts with Tekno or MIP. Not cheap, but might save money and headaches in the long run.

If you are using stock tires that's not surprising. They have no grip.

What holes, top and bottom, are your shocks at? I don't see any amount of droop putting enough strain to blow the piston off the shaft. A bunch of people here including me, launch these trucks high...

There are a few choices but MMP is among the best and most flexible...unless you need a waterproof ESC.

I'm not sure anyone can help because your problem doesn't really make sense.

Totally inaccurate. Why does Traxxas includes a wheelie bar with the truck? Traxxas Stampede 4x4 videos...you might want to watch them.
...

http://traxxas.com/sites/default/files/6708OM-LN-EN-R00-121112_0.pdf

Look at page 24

Yes, 1/4 is smaller than 1/2. If you use the 4 way wrench, tighten it sll the way down, then put the wrench on so a part of it faces up at 12 o'clock. Turn the wrench so that same part pointing up is...

No problem. I guess I had it backwards. That's why I save this stuff.