I have an Emaxx and would like to convert it to brushless. i am new to the hobbie and dont know what i need. Any help would be appreciated.
Printable View
I have an Emaxx and would like to convert it to brushless. i am new to the hobbie and dont know what i need. Any help would be appreciated.
1/8th power system.
I converted a buddies this summer for less than $200 shipped to my door. This included a 2650kv 1/8th scale motor, 150amp ESC and program card, 17 and 21 tooth pinion, and two 2S 5000mAh 45-90C LiPo's.
The ESC/Motor required some soldering...
I would say a project level of 8 out of 10 due to the need of soldering skills.
Other than that, everything bolted right up.
Do you have to use two brushless motors to replace the twin brushed motors? I have a chance to buy a emaxx brushed for 125.00. Good deal?
Good deal if not too much is broke.
Just 1 1/8th scale motor, as stated above.
[QUOTE=Jimmie Neutron;5432913]Good deal if not too much is broke.
Just 1 1/8th scale motor, as stated above.[/QUOTE]
So no other parts are required?
Go for a 2200kv motor a 2650 is more of a buggy motor
Which brushed e maxx is it?
Might be better with a 3800 depending on the model
I believe it's a 3906
You wouldn't need the big motor. Read this [url]http://robotwars.00server.com/emaxxfaq.html[/url]
Thanks for the help.