New Image .12 engine parts
I've been out of the RC world for around 5 years, but I'm back, and I've been studying the Vintage Traxxas models. I've got discontinued parts lists for them all if anyone is interested. Anyway, I've discovered a very interesting source for new Image .12 parts, from the original manufacturer. To read the following, use my explanation here.
Discontinued Traxxas part number=original manufacturer's part number.
These are parts that are identical to the discontinued Traxxas parts.
3239=12124 Stud & nut, carburetor attachment
3239=12118 Nut, carburetor attachment
3241=12845 O-ring, idle mixture needle screw
3242=12811 Nut, throttle lever
3243=12812 Lever, throttle
3244=12813 Rotor (carburetor barrel)
3245=91814 Spring, rotor
3247=12816 O-ring (I can't be sure of the color, mine was missing)
3248=12817K Needle seat, idle mixture (I can't be sure, mine was broken and the internal piece was gone)
3249=12818 Nuts, seat securing (2)
3254=12832 Screw, idle speed adjust (w/ nut)
3254=12837 Screw, throttle stop (w/ spring)
3209=12102 Engine backplate (Eliminates recoil starter) (Requires electric starter) (I can't be sure, I've never seen a Traxxas one)
3213=12111 Gasket, back plate
3221=12110 Bearing, crankshaft (rear) (I recommend an upgrade ceramic bearing)
3222=12101 Crankcase (w/o bearings) (says ASP on the front instead of IMAGE)
3223=12109 Bearing, crankshaft (front) (I recommend an upgrade ceramic bearing)
3225=12203K Sleeve, cylinder/ piston (matched)
3226=12213K Wrist pin/ G-spring retainer (1)
These are parts that will work on the Image .12, but are not identical to the originals.
3240=12804K Carburetor assembly
3246=12815K Body, carb
3250=12861K Needle assembly, high-speed
3250=12819K Nipple/ gasket
3250=12848K Needle valve body
3251=12833K Ratchet spring, high-speed needle
These are parts that will only work with each other, not the originals.
3270=12522K Assembled starter
3274=12506K Backplate (uses 2.5x8mm cap screws, 12518)
3275=12516K Starter shaft
3211=12502K Bearing, one-way starter/ starter engagement housing
I'm still researching if the crank and cylinder head are correct. I'll post them if they are in the near future.
You can get these parts through [URL="http://pelikandaniel.com"]here[/URL]. The prices need to be converted from CZK Czech Koruna to your currency, but the parts are pretty cheap.
Hope this helps!