Fan selection for VXL ESC & Motor?
Hi guys, now that I have the temps under control through the pinion swap and tranny flip, I would like to add a fan setup. I've heard the integy heatsink/fan has issues, I have the traxxas heatsink on my motor - so I'm
wondering if anybody has a fan mfg of choice or if the larger traxxas fan (with some mods) is a good unit.
The toyz seem to be out of stock on their fan/heat sink.
Would like either a large fan to pass air over ESC and Motor or 2 smaller fans.
This guy's setup maybe overkill, but looks solid.
I measured the 380 with the Traxxas blue heatsink (which I really like, it wraps around pretty far and seems to extract heat nicely) and see its very close in diameter to a 540 motor.....so I'm going to order the castle mamba fan setup designed for a 540 ( [url]http://www.castlecreations.com/products/cc_blower-cm36.html[/url]) which (hopefully) will clamp right on to the traxxas heatsink. I also ordered a 30mm much more fan which I plan to install to face both the esc and motor where the current servo is mounted and move the servo to the other side.
I will let everybody know if this works. Parts should take 3 days to get.