TQ-3 range is terrible after brushless conversion
So I have the standard radio and receiver that came with my Revo 2.5R many years ago.
Since I have done a brushless conversion the range is terrible.
Here are some things I've tried:
[LIST][*]Using different crystals[*]Using a different radio[*]Using a different radio and transmitter[*]Wrapping the receiver in tin foil[*]Checked antenna wire and it is fine[/LIST]
I'm fairly convinced that it is due to noise from the ESC, I've tried routing the cables a bit differently with no difference.
Please note both receivers and transmitters are from fairly old nitro cars. All I can think is that they are not designed to filter the noise generated by the new electronics.
Any advice or help is appreciated. Thanks in advance.