Nitro Stampede Picture & Video Gallery

well one of my stampede's anyhow , my son thinks it is his


[IMG]http://i233.photobucket.com/albums/ee165/ironoutlaw/100_0691.jpg[/IMG]

[url]http://www.youtube.com/watch?v=2_JDg0RA9V0[/url]

me and my friend bashing in the snow :D

This is just a short video from today, I was driving and filming my Nitro Pede, so, it wasn't easy...

[youtube]<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/A6uZw-MzP5E&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/A6uZw-MzP5E&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>[/youtube]

:)

3.3 monster pede, with lots of stuff....
[IMG]http://i268.photobucket.com/albums/jj2/thindude/rc%20nitros/rcnikoned013.jpg[/IMG]
[IMG]http://i268.photobucket.com/albums/jj2/thindude/rc%20nitros/rcnikoned019.jpg[/IMG]
[IMG]http://i268.photobucket.com/albums/jj2/thindude/rc%20nitros/rcnikoned008.jpg[/IMG]
[IMG]http://i268.photobucket.com/albums/jj2/thindude/rc%20nitros/rcnikoned010.jpg[/IMG]
[IMG]http://i268.photobucket.com/albums/jj2/thindude/rc%20nitros/rcnikoned011.jpg[/IMG]

[IMG]http://i198.photobucket.com/albums/aa318/moparfreak65/DSC04197.jpg[/IMG]


[IMG]http://i198.photobucket.com/albums/aa318/moparfreak65/DSC04201.jpg[/IMG]


[IMG]http://i198.photobucket.com/albums/aa318/moparfreak65/DSC04205.jpg[/IMG]

I was not able to edit a/m post, therefore you can see the new pictures in a new post:

[IMG]http://img684.imageshack.us/img684/8608/stampede20.jpg[/IMG]
[IMG]http://img541.imageshack.us/img541/1880/stampede24.jpg[/IMG]
[IMG]http://img192.imageshack.us/img192/1388/stampede28.jpg[/IMG]
[IMG]http://img156.imageshack.us/img156/851/stampede27.jpg[/IMG]
[IMG]http://img293.imageshack.us/img293/7826/stampede22.jpg[/IMG]

[URL="http://monster.traxxas.com/showthread.php?t=441216"]Full Story of my "Orange Thunder" Project[/URL]

here are the pics of my 1996 Nitro stampede with the trx.12 engine
[URL="http://www.facebook.com/photo.php?pid=255171&l=54f281df27&id=100000473054457"]http://www.facebook.com/photo.php?pid=255171&l=54f281df27&id=100000473054457[/URL]

[url]http://i1012.photobucket.com/albums/af241/xxryan76xx/RC%20cars/100_2072.jpg[/url]
[url]http://i1012.photobucket.com/albums/af241/xxryan76xx/RC%20cars/100_2073.jpg[/url]
[url]http://i1012.photobucket.com/albums/af241/xxryan76xx/RC%20cars/100_2074.jpg[/url]
[url]http://i1012.photobucket.com/albums/af241/xxryan76xx/RC%20cars/100_2075.jpg[/url]

[B][color=navy]Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo[/color][/b]

here's my nitro stampede. it's all stock (for now) except i dropped the body.

[IMG]http://i1011.photobucket.com/albums/af239/ericg2000/npede.jpg[/IMG]

over the weekend, i installed a jato wheelie bar on my stampede

[IMG]http://i1011.photobucket.com/albums/af239/ericg2000/IMG_0350.jpg[/IMG]

Here's my Pede all geared up for the beach with Sand Paws:

[IMG]http://a.imageshack.us/img829/4681/downsized0825000210.jpg[/IMG]

[IMG]http://a.imageshack.us/img826/6130/dsc00393d.jpg[/IMG]

[IMG]http://a.imageshack.us/img841/3994/dsc00403e.jpg[/IMG]

Check out the video [URL="http://img842.imageshack.us/img842/6799/nede4pedebeach.mp4"]HERE[/URL]

I'll be posting some better vids in the near future!

[IMG]http://i792.photobucket.com/albums/yy209/devenaberger/Nitro%20Stampede/106_0001.jpg[/IMG]

[IMG]http://i792.photobucket.com/albums/yy209/devenaberger/Nitro%20Stampede/106_0025.jpg[/IMG]

[IMG]http://i792.photobucket.com/albums/yy209/devenaberger/Nitro%20Stampede/106_0017.jpg[/IMG]
before motor mounts came in, just a mock up havent run that body yet but do have the motor done

Just about done with the Jato A-arms conversion. Still need the front trunbuckles and new wheels.

[IMG]http://i825.photobucket.com/albums/zz171/slexo87/Nitro%20Stampede/0929001829.jpg[/IMG]

[IMG]http://i825.photobucket.com/albums/zz171/slexo87/Nitro%20Stampede/0929001829a.jpg[/IMG]

Changed again from Street Truggy to Offroad......
[IMG]http://img829.imageshack.us/img829/5498/img3223fz.jpg[/IMG]
[IMG]http://img340.imageshack.us/img340/7421/img3224v.jpg[/IMG]
[IMG]http://img201.imageshack.us/img201/3189/img3230h.jpg[/IMG]
[IMG]http://img714.imageshack.us/img714/7595/img3257dn.jpg[/IMG]

[video=youtube;tim2tDVJEVE]http://www.youtube.com/watch?v=tim2tDVJEVE[/video]

New body

[IMG]http://img42.imageshack.us/img42/2789/pede1.jpg[/IMG]

[IMG]http://img213.imageshack.us/img213/650/pede3.jpg[/IMG]

[IMG]http://img214.imageshack.us/img214/1138/pede2.jpg[/IMG]

[IMG]http://img208.imageshack.us/img208/6867/20101021232629272.jpg[/IMG]

[IMG]http://img819.imageshack.us/img819/9664/2010102218165466.jpg[/IMG]

[IMG]http://img43.imageshack.us/img43/9565/20101107213740177.jpg[/IMG]

[IMG]http://img59.imageshack.us/img59/4346/20101113154012211.jpg[/IMG]

[IMG]http://img585.imageshack.us/img585/1897/2010110612202526.jpg[/IMG]

[IMG]http://img259.imageshack.us/img259/1848/20101122210236602.jpg[/IMG]

[IMG]http://img211.imageshack.us/img211/4388/20101119165622734.jpg[/IMG]

Check it out. Stampede upgraded to 3.3. Used the conversion kit 2.5 to 3.3 from buytraxxas.
[IMG]http://i184.photobucket.com/albums/x279/irideblue/juneseventhtwothousandeleven/2011-06-07225756.jpg[/IMG]

[IMG]http://i184.photobucket.com/albums/x279/irideblue/juneseventhtwothousandeleven/2011-06-07230137-1.jpg[/IMG]

my old Nitro Stampede I gave to my son for his 10th birthday, gave him the rims and tires and body as well that day. Both of us painted it, think it came out great.

[IMG]http://i763.photobucket.com/albums/xx280/75ramcharger/031.jpg[/IMG]

[IMG]http://i763.photobucket.com/albums/xx280/75ramcharger/032.jpg[/IMG]

[IMG]http://i763.photobucket.com/albums/xx280/75ramcharger/029.jpg[/IMG]

Finished this guy up last night.

[IMG]http://i242.photobucket.com/albums/ff127/blue504life/a6840734.jpg[/IMG]
[IMG]http://i242.photobucket.com/albums/ff127/blue504life/e8a52226.jpg[/IMG]
[IMG]http://i242.photobucket.com/albums/ff127/blue504life/c6d00af5.jpg[/IMG]

Completely stripped and cleaned the whole thing before powder coating the chassis and cooling head

[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture523.jpg[/IMG][/IMG]
[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture524.jpg[/IMG][/IMG]
[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture525.jpg[/IMG][/IMG]
[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture526.jpg[/IMG][/IMG]
[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture528.jpg[/IMG][/IMG]
[IMG][IMG]http://i290.photobucket.com/albums/ll258/scoobedog/rc%20trucks/Picture527.jpg[/IMG][/IMG]
Grave digger project...... in progress.

thanks i couldnt screw the tank down but instead put velcro on it until i drill new chassis holes to hold it down. coming along slowly. thank you for all the help humayrayakongkinaon.

how funny it shows 3 pics but not the fourth one well here it is i hope it works.
[IMG]https://lh5.googleusercontent.com/-woyKGFj420Q/Tx31R0Oc7II/AAAAAAAAABs/YTx5tNvxbZo/s800/2.jpg[/IMG]

Took some Vid today of my Nitro Stampede after a few mods done to it, just try it out with the new proline maxx tank, resonator pipe and rebuilt tranny. throttle was a little touchy only could get 1/4 throttle out before wheels pop up like in vid.

[video]https://picasaweb.google.com/lh/photo/JthhDszvmj5wbm_n0qNw0Fxx1MHMc6GEHXVyfJ-5kC0?feat=directlink[/video]
[video]https://picasaweb.google.com/lh/photo/B_5sOLlzSGVuGJRgMKOmklxx1MHMc6GEHXVyfJ-5kC0?feat=directlink[/video]

well i checked pics that i posted earlier and they dont work so here goes again.
[IMG]https://lh5.googleusercontent.com/-kFfo8qwe128/Tx3077KsCUI/AAAAAAAAABM/_L8QTeAOTjM/s800/1111.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-KGZnkNxLJic/Tx31EqAthgI/AAAAAAAAABc/nouO4oD17Vo/s800/1234.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-MJPgIHq5K34/Tx31SNhWNtI/AAAAAAAAABw/KOiY9fuciao/s800/1.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-Zxt4JiJHboc/Tx31esVJOCI/AAAAAAAAAB8/SUgXv7gj7lI/s800/untitled.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-oEoqRfqW4SE/Tx31mX62G9I/AAAAAAAAACU/sjSpkU7a3wI/s800/untitled%25201.jpg[/IMG]

These are before pics without New Fuel tank:
[IMG]https://lh5.googleusercontent.com/-ts20DGpPQCk/Tx31ldVyZhI/AAAAAAAAACM/iloVYKmKswQ/s800/untitled2.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-3yZEFfFDlp4/Tx31e7MYxII/AAAAAAAAACE/3fun09cYRZI/s800/untitled3.jpg[/IMG]

new updated pics of my pede work in progress
[IMG]https://lh6.googleusercontent.com/-0kRJhvuWEBA/TyzEFw2Sa0I/AAAAAAAAAD4/ZLGL5uY0C1U/s640/0203122042.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-x_gmdnR1cXM/TyzEGcDt40I/AAAAAAAAAEA/YjwcpF_0Cz0/s640/0203122042a.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-cNw6n-XkSxc/TyzETw5gLuI/AAAAAAAAAEM/wXu8DlfhT6c/s640/0203122043.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-uU-WM2HrZKM/TyzET7Bwh9I/AAAAAAAAAEI/D5QJ5uDMaPs/s640/0203122044.jpg[/IMG]

I put the stock Blue Chassis plates on and changed the dog bone for the optional black one

[IMG]https://lh3.googleusercontent.com/-T22zMVfn7OA/T0G_S0Iu-VI/AAAAAAAAAGc/Nhcs8wiIRGw/s640/0219121925.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-Zq6ed6MCzYQ/T0G_g-bHdVI/AAAAAAAAAGs/BNMYqddN8Ck/s640/0219121928.jpg[/IMG]

since my rear shock tower broke sometime back i had to make this aluminum plate for the meantime, holds good but didnt come out well atleast to look at LOL.

Finally drilled the chassis plate to mount the proline tank but that didnt come out well either still needs a little work on the position of the holes.

[IMG]https://lh4.googleusercontent.com/-lY8ooutSpes/T0G_Sx6rIAI/AAAAAAAAAGg/MTsaX6bg8GI/s640/0219121926.jpg[/IMG]

Made a brace for the shock tower
[IMG]https://lh4.googleusercontent.com/-qQks4HZLJZE/T0G_g-TH06I/AAAAAAAAAGw/orqtYzEBIVk/s640/0219121928a.jpg[/IMG]

got some updated pics, done some work on pede today.
[IMG]https://lh6.googleusercontent.com/-reuVFbJMXhc/T2z-7oEXRRI/AAAAAAAAAN4/yIHY3Sws5ks/s640/0323121322.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-pi1F9ZOXUyw/T2z_Kr_0AbI/AAAAAAAAAOA/Q8MaqK5e0iQ/s640/0323121323.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-IgKwDqincns/T2z_MHIkujI/AAAAAAAAAOI/m03P83g9fME/s640/0323121323a.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-2sYWC8R12DI/T2z_MmuadiI/AAAAAAAAAOQ/yuEEcvT8R0I/s640/0323121324.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-mb-PdTBGXXQ/T2z_id6D52I/AAAAAAAAAOg/4Pgez9YTaDQ/s640/0323121324a.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-F47jYYB9iqA/T2z_w-863WI/AAAAAAAAAPA/WrxryDDx3kU/s640/0323121325.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-4f7PIsT0-Uo/T2z_hF5mLrI/AAAAAAAAAOY/bfZDOG3FEPo/s640/0323121521.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-Kv1XfL2Oiro/T2z_zTyXF2I/AAAAAAAAAPQ/XTKLJTAW6Sc/s640/0323121522.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-S54CDaAjh6o/T2z_mo8irNI/AAAAAAAAAOo/Wzb9dA0oZ9E/s800/0323121522a.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-HbuQcrWLljo/T2z_rEROE3I/AAAAAAAAAOw/XQfksBr9HF8/s800/0323121523.jpg[/IMG]

as pic limit more pics:
[IMG]https://lh6.googleusercontent.com/-ghigS-1lXBw/T2z_u14yOmI/AAAAAAAAAO4/eM4RK57-ANw/s800/0323121524.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-GXrSxaX5ITY/T2z_x0fOI6I/AAAAAAAAAPI/6_6Ph3i6dnQ/s800/0323121524a.jpg[/IMG]

got some parts in today for my N-Pede, put some RPM electric rear a arms, will be putting a Jato wheelie bar as soon as i move and get my drill out to make some mounting holes.
[IMG]https://lh4.googleusercontent.com/-tSQtNn5nhQ4/T3--1PB4-AI/AAAAAAAAATc/LCZvkd_FqbY/s640/0406121939.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-tSQtNn5nhQ4/T3--1PB4-AI/AAAAAAAAATc/LCZvkd_FqbY/s640/0406121939.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-70haKZvjecM/T3--6MI-4hI/AAAAAAAAATo/fPluA8NI6ck/s640/0406121940a.jpg[/IMG]

[IMG]http://i1267.photobucket.com/albums/jj558/wildironman/scan0043.jpg[/IMG]

My Nitro 3.3 pede...

[IMG]http://i1070.photobucket.com/albums/u488/j-tello/IMG_0020.jpg[/IMG]

ok did more work to pede and got the jato wheelie bar installed not too hard i might had and holds up good the way i have it.


[IMG]https://lh5.googleusercontent.com/-MBLEm9tiwb0/T5NtjZUAfQI/AAAAAAAAAUQ/r7bO1iS34hU/s640/0421121428.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-ZBO5k8xId9w/T5Nt1sQxTqI/AAAAAAAAAUg/PAK0ecDXfV8/s640/0421121428a.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-MXmm6IinIcg/T5NtaKHfEEI/AAAAAAAAAUI/Bpl20hYEjVo/s640/0421121429.jpg[/IMG]
[IMG]https://lh3.googleusercontent.com/-4yFBxItbmx8/T5Nt1g0x3vI/AAAAAAAAAUk/jTpK5KH6Is8/s640/0421121430.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-26bAO8KWiVQ/T5NtzDcGXgI/AAAAAAAAAUY/6dDYF1jrgi0/s640/0421121429a.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-jsgGkpLWH6A/T5NugHm6-OI/AAAAAAAAAU4/BXnPvJpNRh0/s640/0421121431.jpg[/IMG]
[IMG]https://lh6.googleusercontent.com/-loWqBl5xuMQ/T5NuYtmgVnI/AAAAAAAAAUw/iAjvrB_Kcsg/s640/0421121432.jpg[/IMG]
[IMG]https://lh4.googleusercontent.com/-WVNb9a9lMRM/T5NuoUa3AWI/AAAAAAAAAVA/JeZJxt41fII/s640/0421121433.jpg[/IMG]
carnage picture of old cooling head that is about to retire about time.
[IMG]https://lh4.googleusercontent.com/-MAibvXygd3w/T5Nu2_8t5gI/AAAAAAAAAVQ/MbBJxkK2F30/s800/IMG00291-20110916-1123.jpg[/IMG]
from the beginning when i first started this build this is how it looked. i should have made a build thread but didnt have the time or wanted to make one lol some people do but not me maybe some day.

so installed my cooling head that i got off here. along with a 20t CB so geared at 20/70 now, might go for 22/70.

[IMG]https://lh4.googleusercontent.com/-hUkTWC6OtOQ/T5ShVpg9NbI/AAAAAAAAAVk/E-TebxFnT2I/s640/0422121656.jpg[/IMG]
[IMG]https://lh5.googleusercontent.com/-f1DaZxSMFKo/T5ShWD9ETII/AAAAAAAAAVs/UQzrWdtaKDU/s640/0422121657.jpg[/IMG]

Here are my pics:
[url]http://s1153.photobucket.com/albums/p516/chiefnitro/[/url]
fluorescent nitro digger!

took some vids today enjoy.

[video=youtube_share;d2_ak14zBiA]http://youtu.be/d2_ak14zBiA[/video]
[video=youtube_share;XnHwngg5Iz8]http://youtu.be/XnHwngg5Iz8[/video]

[IMG]http://i1266.photobucket.com/albums/jj530/Werner700/RC/NitroStampede.jpg[/IMG]


[video=youtube;HbNkEr3do8k]http://www.youtube.com/watch?v=HbNkEr3do8k[/video]


I've moved this thread into the Gallery where it belongs with all the other pics and vids of Stampede's... :cool:

This is my traxxas stampede[video=youtube_share;HN35LICzu4o]http://youtu.be/HN35LICzu4o[/video]

file:///C:/Documents%20and%20Settings/Walker%202/My%20Documents/My%20Pictures/Picture/Picture%20019.jpg