Forum: Slash 4X4

The ESC is just shutting off, i have a fan on both the motor and the ESC. Motor temps were about 140 and the ESC temps were about 135 at the times...

i just looked on tower hobbies and looked at castle and i saw a 1/10 scale side winder sport brush less esc and motor combo anybody running this?

hey guys i was wondering what would make the stock shocks better cause i dont want to have to go buy a new set of shocks. thanx

Hey guys. My MMM 2650 combo arrived and I am in the process of installing it. I do have some questions: 1 - I purchased a 21 tooth RR pinion...

Ok i ran my 2s 20c 5000 SMC battery yesterday and wanted to run it till it went to lvc mode. It took about 30 min or so before it went into this...

New user here. Without really needing upgrade shocks, I was on a frenzy at the LHS and bought the Proline Shocks (front and rear). Are they...

:confused: :confused: Ok.... rebuilding for next race and looked at spur gear (3956R-54T) and decided to get a new one & a spare. Am I speaking a...

wondering who is going out to the race this weekend at mike's in porter/houston tx?!?

Does anyone know the stock spring rate on the ultimate with the big bore shocks?

I love my Slash 4x4 but I feel like i need some upgrade to get my truck better through the grass and in the dirt i bash in. All the tires I see are...

I got this idea from another thread on this board (or maybe a different one, I can't remember) and decided to try it myself. Bought a new stock...

I’ve been doing some maintenance and realized as I was putting the hub hex’s back on, a couple did not want to “snap” back on to the pin, so I just...

my body on my slash ultimate 4x4 has cracked at the rear and the body pin holes are torn so the pins go staight through.. yeah i bash hard but thats...

Guys i just happened to get a great deal on a caster racing fusion so i am going to take my mmm and 2650kv motor out of my slash 4x4 and use it for...

I just picked up a used 4x4 roller, just not sure on what system to get. I am a racer not a basher. I had a scrt10 and equiped it with a mm pro with...

Just to share, I've had some great results from an 8-cell, 9.6v battery. I have this particular one, although I'm sure there are others: ...

SMC 2s 28c 6000mah sport max lipos, for racing 4x4 slash.

Has anyone used any aluminum sheets as a chassis protector? I was thinking of picking some up and screwing them on. I've been bashing my truck ragged...

Just bought a SMC 2s 28c 6000mah lipo. Charged it up, Ran it in my slash 4x4, made sure I had it in low voltage cut off. Ran great, ran for 35 min,...

I see people are trying the Los! 3.7wt and the 4.1wt springs and having luck with them. Does anyone have any part numbers for these. I am running big...

http://www.*********.com/*********/store/uh_viewItem.asp?idProduct=11939 Claim to have a different internal fabric for better burst power...

I am wondering what heatsink and esc fan you guys are using/reccomend? Also, when i charge my lipo, should i balance charge it every time? Thanks,...

So the day I have been anticipating for like a week now has finally arrived. Got in a 4X4 roller chasiss from Ebay. While I was waiting on it,...

i am thinking about making a backslash and im wondering what all parts i would need to do so

So I ran my Slash 4x4 Ultimate for the first time last night. After a great run I decide to check on the bearings(5119, 5116), and the bearing...

Ok Yesterday was the first day I got to take my truck out after installing the motor plate and mount from traxxas. I decided to run and bash around...

So my 4.5 was hitting 165ish with either 14/52 or 13/52. No heatsink or fan yet. A very knowledgeable racer (has a past nat title also) told me that...

hey guys. if wanted to run my slash in 2wd instead of 4wd could i take out the front diff and have better results? wouldnt it make it a little...

Can I use 4wd slash wheels on my 2wd ? Don't see a difference in wheels. Is there something i'm missing ?

Since I stepped up to 3s, I've only snapped 1 rear axle (torn ear), but I've replaced quite a few sets due to twisting the shafts so out of shape...