:confused:feeler pricing for used 4x4

[Lordsilas]

i'm wondering what my decently used slash 4x4 could be worth.
it has:
rpm arms all around
brand new rpm rear bearing carriers
rpm nerf bars
very nearly new vxl 3s esc( 2 runs on it for about 1/2 hour drive time)
vxl 3500 motor good condition
2075 servo good condition
traxxas big bore shocks in good condition.
bearing are in middle of the road condition
serviceable body
stock wheels with plenty of tread left
either no tx/rx or a tq 27mhz am tx/rx

thanks for your input

[El Sob]

I would say, around $200.00?

[thumperc25]

Used they go for 3 ish around my area, if I was you I would pull off some of the aftermarket stuff and sell separate

[2Rocky]

Recently, through slaes and dicount codes a new 4x4 slahes have been around $350 w/o the TQi. So I would estimate a near near condition Slash is no more than $300. Without a transmitter and reciever at least another $50 to $75 reduction. The other problem w/o a transmitter is there is no way to insure any of the other electronics or drive train is good. So most will look at the truck as a roller with some upgrades. New rollers are about 150, discount 25 or so for used. then add some for the extras, body, wheels, and some stufff for the upgrades - I have a couple ways to estimate the value at about $200.