View Full Version : Gyro on a XO-1
TazMotorsports
01-26-2012, 04:33 PM
My XO-1 will be here Monday.:cool::cool::cool: I was noticing how eratic the handling can be. How do people use or install a GYRO into these?
Double G
01-26-2012, 04:42 PM
Post #4:
http://traxxas.com/forums/showthread.php?8937666-My-first-impressions.
iMotion_Dung
01-26-2012, 04:45 PM
on that same thread ^^^^
I posted the D-Box video on how the Gyro works.
Post #15
mattbaillie22
01-26-2012, 09:23 PM
In a nut shell plug the gyro into your steering servo cable, the gyro into the receiver. Make sure your settings are at 0% make sure the gyro is on norm and not reverse. There are many good choices like esky, drift box or the other one I can't name, use your google Fu and do some research
---
I am here: http://maps.google.com/maps?ll=-27.468075,153.030363
Hello my name is Matt and i'm addicted to Traxxas.
iaanr
02-05-2012, 11:59 AM
As an aside, I hooked up a Futaba G190 to my otherwise stock setup. The gyro seems to have really limited the steering servo travel and turning radius. Not happy with this limitation so I removed it. It did allow me to mash on the throttle without spinning out though. Might try again with a different servo. Anyone notice this problem?
BL-Bob
02-06-2012, 10:05 AM
^You'll have to adjust your gain rate to set it up.(twist the dial)
Philbilly
02-07-2012, 11:34 AM
Does the Traxxas ez peak 6amp charger come with the 2 LIPo battery charger
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.