porlkertus
03-19-2011, 12:07 PM
Hi All,
I picked up a 1/16th brushed e-revo and will be removing the XL-2.5, 380 motor and 27MHz radio gear.
Shall be installing 2.4GHz, bigger motor mount and a brushless 540 but cant decide which system to put in.
The two systems I have are:
1) Mamba Max esc with CM36 5700kv motor
2) Ezrun 60A esc with 3300kv motor
I plan to run on 2S lipo which are 20C rated 2200mah packs. Max sustained current therefore about 45A.
I will be running on an off road dirt track where 30mph would be more than adequate.
Mamba would give me 8*5700=45,600 rpm is this too fast?
Ezrun would give me 8*3300=26,400 is this too slow?
Also I have a spare pinion and spur coming to give me some gearing options but what is your gut feeling - Ezrun or Mamba? :unsure:
Please post any opinions - thanks!
I picked up a 1/16th brushed e-revo and will be removing the XL-2.5, 380 motor and 27MHz radio gear.
Shall be installing 2.4GHz, bigger motor mount and a brushless 540 but cant decide which system to put in.
The two systems I have are:
1) Mamba Max esc with CM36 5700kv motor
2) Ezrun 60A esc with 3300kv motor
I plan to run on 2S lipo which are 20C rated 2200mah packs. Max sustained current therefore about 45A.
I will be running on an off road dirt track where 30mph would be more than adequate.
Mamba would give me 8*5700=45,600 rpm is this too fast?
Ezrun would give me 8*3300=26,400 is this too slow?
Also I have a spare pinion and spur coming to give me some gearing options but what is your gut feeling - Ezrun or Mamba? :unsure:
Please post any opinions - thanks!