View Full Version : Stampede VXL to Stampede 4x4
11-22-2010, 09:56 AM
I already have a VXL and was wondering how hard it would be to convert it to 4x4 when the parts come out. I am assuming all i would need is the chassis and driveline componets. Would it be worth it? I don't have $400 to spend on a new ride right now. Wondering what everyones thoughts were. Thanks.
11-22-2010, 10:23 AM
This is the exact same question asked in the 2wd slash forums when the slash 4x4 came out. The answer is the same, you will not be able to convert a 2wd to a 4x4. 99% of the parts are different between the two and two very different designs.
11-22-2010, 11:52 AM
Ok. So the best thing to do is wait awhile and get a 4x4 roller. Thanks.
11-22-2010, 04:38 PM
I think the only parts that are the same are the rear arms, body, motor/esc/servo and the front wheels. Everything else is different.
11-22-2010, 05:54 PM
Not going to happen sorry... I wanted to do the same thing until I learned that pretty much all the parts are different. I would wait for a roller to come out. Even possibly a used roller a little while after the 4x4 has been out.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.